Manual

A ÷ [

IEEE=1394 device management

The IEEE-!394 device infbrmation is saved in the TV's

mernor> You can edit this device infbrrnation (fbr example, to

edit the device name, change the analog input infbrmadon, or

dde[e the device information f'rom the TV's memory if you no

longer use that device).

To edit the IEEE-1394 device information:

1. Press MENU and open the SETUP menu.

2. HighIigh_ INSTALLATION and press ENTER. (A new see

of INSTALLATION mepm icons will appear on-screen, as

shown in s_ep 3 brow).

Open the DEVICES menu, highlight IEEE-!394

DEVICES, and press ENTER.

4, Highlight the device you wan[ [o edit and press ENTER,

Important information regarding

UEEE-1394 device interconnection

Note:

, Do not loop tbe last device in the chab_ back to the T_.

If lhe cievieechain is/oopecL the TV may /lot _1/o_;_propedy with the

ethel deviees b the d}ain

° Place devices" with the slowest communication speed at

the end of each chaD1./fs dev/ee with a slower cammu/_/cat/on

speed is placed ahead era f,'_stefdevice b the ehain, the s/qnd

from the slowe_ devic'e will/lffefgf_ with 17}esternal fleI7_the f_ste_

cievice 7o dete/TT_ifiethe con_mul_icr;,tionspeed of an IEEE 1394

cievice, look _f an ",5'"number near the deviee t_/EEE 1394

eof_nectoL 2?e hkjhet the "S" ntJrrlbeL the fnstef #_edevice /i yauf

cieviee is/iotmat?ed with a/1%'" numbeL look in the device 3 tJsef

manual or call the cJeviee/_laflt./f_/ctt./[_[_ ted_ni(-_#support number

° If your IEEE= 1394 device has a two=position power

switeb, place the device at the end of the chain or leave

the power switch ON at all times, ff the powe_ switch is OFF

it will interfere w_thsignals from devices be/7ind it in the el}ain

• The maximum length for an tEEE= 1394 cable between

each device is 15 feet.

° This TV/1_an/EEF _394A device 77_e/_EE _394B protocol is

__stefand intended to allow to_ /onge/ d/st_nc'esbetween dJev/ees

andmult/ mom s_/stems /EEE _394A to IEEE _394B eonverteta

(_w_i/_bleat softie e/eotfoflics SL/pplie/_) may allow compatibility of

IEEE _394B devices with you/existing IEEE _394.A devices

• The i"l_fflsnll:5siof7cnpab///ty of/EE_ _394 c_',bleused k_//tht/7/s7-1/

must be .94O0 (4O0 M/g_s max/munl)

5, Folh)w the on-screen prompts to modia_ the device

in_brmation,

HM94(E}012 25(2B-Cnct}

24 _ 8/31/04, 12:53 PM [