Manual

A ÷ L
Connecting an HDMI" or a DVi device to the HDMI input
The HDMI I_]input on your IV receives digital audio
and uncompressed digital video from an HDMI device
or uncornpressed digkal video fforn a DVI[2]device.
This input is designed to accepEHDCP [31program material in
digital form from EIA/CEA-861/861B-compIiant I<consumer
electronic devices (such as a set-top box or DVD player with
HDMI or DVI outpuD.
The HDMI input is designed tbr best perlbrmance with 720p
and 1080i high-definition video signals, bu[ will also accep[
and display 480i and 480p signals.
[
NOTE: NEVEiR gONNEC'[ TH|S I'V
TO A PERSONAL C:@MPUTER (PC).
THISTVIS NOTINTENDEDFORUSEWITHA PC,
To connect an HDMI device, you will need:
. one HDMI cable (type A cormector)
Fbr proper operation, it is recommendeci ibat you use
as short an HDMI cable as possible You should not
enc;ounf_r r/ifficulty ffyou use an HDMI cable shorl_r
tf_ar716 4 fl (,Smj
HDM/ c'ab/e transfers both video and audie, Separate
arTa/og audio cab/ms are not required (see illusirasfon
be/owj Some CDVs (viUeo CDs] may not output Uigila/
auUie signals, In that case, you may hear sound by
c'onnecUrd analog audio c.ab/es I-Iowmver; ff you c:c_nnect
arTa/og auUio cables with ibis c.onnec'Uon, ibe HDM/
t>rTninal on the TV win not rec'cive UveI-tDMI cJg)italaudio
signal and you viii/hear analog auUio only
,gee "Setlieg ibm HDMI auUie merle" on page 49
HDI_I device
TV
[q HDM/ H'_/h Def/n/l/on Muli/medkl Interf_ce
[2] DV/ Diq/tal ViUeo/nten'nce
Is] NDCP N/_'h bafTdw/dth D/_'/?;IIContesTtPfotect/orl
[4] E/A/CEA 86 WH67B compliance cove/s the tf_lf7smlsslof7of
docompfmssed d/_'/ta/ v/Ueo w/lh h/gh ba/ldw/dth d/?/ia/ cof)imf)t
protection, wlTM) /s brits[1stgmdardl2ed for fmception of hl_'h definii/on
video signals Because tiffs/s an evoMng tedTno/oss h'/s possible that
some devices may riot ope/_te properly w/lh the Th'
NOTE: _ ensure that the HDM/ ot DV/ device /s reset
pmpefljz ills _mcommended that you b/low these
pmcecMes
" Whel7 ium/Hg ol7 your electronic C'OfYlpof7eRtS, tHrH 0#t
the Tg first, and tl_eo tl_eHDMI o_ DVI device
• Whel_ turning offyour elect/ohio compoilen_5, turn off
the NDMt or Oil# dev#ce first, and then tl_e TQ:
To connect a DVI device, you will need:
. one HDMI-to-DVI adap[er cable
(HDMI type A connector)
_b_ pmper opelai/on, lhe lef_gtl_of an HDMI-io DIll
ad_pimf cHb/e dToul(I riot exceed 98 tt C3mj Yhe
rmcomrrle/_ded lerlg177/s 6 6 tt _2m]
" one pair of standard analog audio cables
An HDMI to DIll adapte/ cable tlansfef_ vk/eo on{lz Separate
analog audio cabbs a_e required (see/llusl's_tion belowj
See "Setik W ffTeHDM/ aur//o moUe" on page 4,9
OVldevice
TV
÷
HDMI,the HDMI logo,and High DefinitionMultimedia Inte_lace
aretrademarksor registeredtrademarksof HDMI Licensing,LLC,
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
HM94(E)012-25(2B-Cnct) 19
÷
8/31/04,12:52 PM
19
[