Manual

A ÷ L
Connecting a VCR and sateJJitereceiver
Note: The TV Guide On Screen _system does not receive progrJn
I/st177gsfrom or f_._rany satellite serwce
You will need:
_, three coaxial cables
_, one set ef cemper_er_t video cables (ifyour
sateIIite receiver does r_e[ have cernpor_ent
vide(), cotmec[ the standard A/V cables only)
three sets of standard A/V cables
• f%rbette/picture peffonrlanc< ifyoln satellite
receiverand VCRhaveS video connectS vkleo
cables(_olustheaudio c'r;,b/e._2inste_dof thestandard
videocables Do not connectboth _/pesof video
cablei?)VIDEO 1(or I/IDEO2) at thesame fibrinor
thepictureperformancewinbe unacoe/:)tabb
• ffyou havea mono I/CR,c-or?f?ectZ/MONO on the
T1/(VIDEO 0 _z)your VCR_AUDIO OUTjaek ushw
the whiteauogbcab/eon/_
D
To view satellite programs using the
component video connections:
Sdec[ the ColerStream HD-! video input
source on the TV.*
To view satellite programs using the standard
From
antenna
From
satellite
dish m
D
video connections or to record satellite programs:
T, rn on a11three de, ices. Set the V(-;Rto the appropriate
litle irlput (refer te your.VCR owner's manual tbr details).
Sdect the VIDEO 2 video input source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Sdec[ the ANT-! video input source
on the TV.*
Tune the TV to cham_d 3 or 4 (whichever cham_d isvacant
in your area).
Tttrn ON tl'_eV(-;R.Ttme tl',eVCR to the charme[ you
war_tto watch. Sdect the VIDEO 1 _ideo input source on
the TV.*
* ]o select the video input source, press IN PUT on the remote control
(see page 67). ]o program the TV remote control to operate other
devices, see Chapter 3,
The unauthorized recording, use, distribution, or revision of televisioa
programs, videotapes, BVDs, and other materials is prohibited under the
CopyrightLaws of the UNrealStates and other countries, and may sobiect
you tociviland criminalIiahilRy.
StereoVCR
SateNtereceiver
Note: The VIDEO!AUDIO OUTj?_cl<8output the s/}'na/8 from the
ANT 7,ANT2, I/IDEO L VIDEO 2, or VIDEO 3y?mkswhen the
appropn_te input mode is selected
To use the TV Guide On Screen recording features:
1. Connect the G-LINK cable according to the instructions
on page 25.
2. Make sure the VCR is cormected to the A/V OUT jacks
on the TV (see illustration).
3. Set the VCR to the appropriate line input (retbr to >ur
VCR owner's manual for details), and then turn OFF the
VCR.
4. See Chapter 5 for details on setting up the TV Guide
On Screen system.
5. See Chapter 7 [br details on using the TV Guide
On Screen system.
÷
HM94(E}012-25(2B-Cnct}
15
Copyright @ 2004 TOSHIBA CORPOFtATION, All rights reserved,
÷
8/31/04,12:52 PM
15
F