Manual

56
Using the StableSound _feature
When the signal source is changed, the StableSound feature limits the
highest volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StableSound feature:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight STABLE SOUND.
3. Press • or • to select ON.
_AUDIO
SBS ON
SBS LEVEL 8O
SPEAKERS ON
...................... r
To turn off the StableSound feature:
Highlight OFF in step 3 above.
Selecting the background of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray). _L
To select the background: (_ (_) (2)
1. Press MENU, and then press • or • until the CUSTOM menu
appears. (_ (_ (_
2. Press • or • to highlight BACKGROUND. Q10 @
3" Press • or • to select either a SHADED or SOL1D background. Q (_
TIMER
ON O0_OOm
SLEEP OhOOm
OC O 1
FAVORITE CH1
FAVORITE CH2
Displaying on-screen information
Press RECALL to display the following information on-screen:
Antenna mode (when in TV mode)
Channel number or VIDE() mode selected
Time (ifset)
Remaining time of ON/SLEEP timer (if set)
Channel label (if set)
Stereo or SAP audio status
V-CHIP rating status
Picture size (when in ColorStream mode)
RECALL
STEREO
SAP
TV _pG • V
ON T_MER 12_34m
SLEEP TIMER 1_2_m
ANT 1
FULL _OD
OLOOK 0_28 C_LE 6
STEREO
TV_pG • V
ON T_MER 12_34m
_LEEP T_MER lh23m
THEATER Wl DE / DVD
CLOCK 12_34 ColorStmam _-ID/