Manual

Turning off the built-in speakers
Use this feature to turn the TV speakers offwhen you connect an
audio system (See "Connecting an audio system" on page 15).
To turn offthe built-in speakers:
1. Press MENU, the_ press • or • m_til AUDIO menu appcars.
2. Press • or • to highlight SPEAKERS.
3. Press • or • to highlight OFE
STABLE SOUND 0_
H
_J
To turn on the built-in speakers:
Highlight ON in step 3 above.
Selecting the Audio OUT sound
Tiffs feature allows you to select the sound source (MAIN or POP)
that is output from the Audio OUT jacks (See "Connecting two
VCRs" on page 13).
This is useful when amplifying or recording the POP sound with
external equipment while bearing the sound of the main picture
through the built-in speakers.
To select the Audio OUT sound:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight AUDIO OUT.
3. Press • or • to select MAIN or POP.
@@@@@@
@..... il
SBS LEVEL IO0
H
........... _J
• MAIN: Outputs the sound of the main program to the AUDIO
OUT jacks.
• POP: Outputs the sound of the POP program to the AUD10
OUT iacks.
Note:
Make sure the volumecentre/of your audio
amplifier is setto a moderate listening levd
O ® ®
® ® 03
® o o
d °®
-- MENU
-- &V< •
0
Note:
Whenthe POPdouble window ISon.often,
thesound of the main program is output to
theAUDIO OUTjacks, even ff POPis
selectedin theAUDIO OUTmenu
Thesound of the m_/,7p,_gram'isaMays"
outpugfrom the TV'sspeakers,regardlessof
the AUDIO OUTsegting
55