Manual

Connecting a device to the DVI/HDCP 1 input

The DVI/HDCP input on your TV is designed to accept HDCP

program material in digital form from EIA/CEA-861-compliant 2

consumer electronic devices, such as a set-top box or DVD player

equipped with a DV1-D digital single-link output connection. 3

The DVI/HDCP input is designed for best performance with 1080i

high-definition video signals. The DVI/HDCP input also will accept

and display 480p, 720p, and 480i picture signals.

Note: This TV is not intended for connection to

and should not be used with a PC (personal

computer).

You will need:

• one coaxial cable

• one DVI-D digital single-link cable

Note: Forproper operaOon,the DVI D cablelength

should not exceed 3m C98 ft) Therecommended

lengthis 2m (6:6 ft)

• one pair of standard audio cables

DVI/HDCP device

(for example, set4op box or DVD player)

v,oEo _u_

From

Antenna

or Cable

Notes:

DVI/HDCP = Digital VisualIoterface/

High bandwidth Digital ContentProtection

2 EIA/CEA 861 compliance coversthe

transmissionof uocompresseddigital

video with high bandwidth &gital content

protect/on, whichis being standar&zed for

future reception ofhigh definition video

signals

:_Consultyour consumer electronicsdealer

for availabil/oz

Caution:

Toensure that the DV//HDCP deviceis reset

properly, it is recommended that you follow

theseprocedures

• Whenturn/pgon your electronic

components,turn on the TV first,

and then the DVI/HDCP device

• Whentum#Tgoffyour electronic

components,turn off the DVlIHDCP

device first, and then the TL_