Manual

one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of A/V cables
VCR1
From Antenna
TV
VCR2
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of A/V cables
Note:
ff you have VCRswith S video,useS video
cablesinstead of standard videocables for
better picture performance Do not connect
bet/?a standard video cableand an S video
cable to Video 1 CotVideo 2) at the same
time, or the picture performance wdlbe
unacceptable
Do not connect thesame VCRto the output
and inputjacks on the TVat the same tffne
Todub or e&t, VCR 2 must select Line IN,
and the TVmust select VIDEO 1 Csee
"Selectingthe antennafflput" on page 22)
* TheVideoOUTjack doesnot outout the
POPpicture
** TheAu&o OUTjaeks can ou_ut the sound
of either the Main or POPpicture Csee
"Selectingthe Audio OUTsourld" on
page 55J
The unauthorized recording, use,
distribution, or revision of television
programs,videotapes,DVDs, and other
materialsis prohibited under the
Copyright Lawsof tile United Statesand
other countries, and maysubject you to
civil and criminal liability.
Camcorder
Note:
If you have a camcorder with S video, usean
S videocable insteadof a standard wdeo
cable for better picture performance Do not
connect bet/} a standard v/deecable and an
S videocable at the same time, or the picture
performance willbe unacceptable
Video-3 (front panel)
13