Manual

Unlocking programs temporarily
1. If you try"to watch a TV program that exceeds the rating limits
you set the TV *viii enter into the program lock mode.
TN_S pROGRAM HAS BEEN BLOCKEO!
TV-PG L V
E×CEEDS SET L_M_TS
PUSH MUTE TO ENTER P_N
CABLE 4
2. If you want to watch the locked program temporarily, press
M[JTE.
3. Press the Number button (0-9) to enter the 4-digit code you have
stored.
BLOCKING ACTIVE
ENTER P_N COOE
TO TEMPORARELY Ut,LBLOCK
0 9:TO SELECT ENTER:TO SET
4. Press ENTER.
If tbe number is correct, the lock mode will be released and the
normal picture will appear.
All locking is disabled until the TV is turned off.
It will be enabled when the power is reapplied.
If a wrong PIN code is entered, the message "Incorrect" appears.
Enter the correct code again.
Locking channels
With the CH LOCK feature, you can lock specific channels. The TV
will not be able to tune these channels with the Channel • • buttons
or Channel Number buttons, unless )_u clear the setting.
You can lock a maximum of eight channels.
To lock channels:
1. From the LOCKS menu, select CH LOCK.
2. Press _ or I_ to display the CH LOCK menu.
3. Press the Channel Number buttons to enter the channel you
want to lock. (The channel, ou are currently watching cannot be
locked.)
4. Press ENTER.
LOCKS menu
_LOCK$
V CH_P
ENABLE BLOCKING ON
TV RATING
MPAA RATING ii
NEW piN CODE il
To select each item:
Press • or •.
_LOCKS
v cH_p ii_'
ENABLE 9LOCKING OFg
TV RATING
MPAA RATING
_LOCKS
V CH_P
ENABLE BL©CK_NG OFF
TV RATING
MPAA RATING
5. Repeat steps 3 and 4 for other channels.
35