Manual

20
Learning about the remote control
Only tbe buttons that are used to operate the TV set are described
here,
POWERturns the TV on or off"
SLEEPsets the WV to turn off at a specific time (page 42)
LIGHTTbe initial press of the LIGHT button causes two actions:
1) enables the illumination mode
2) illuminates the keypad.
Subsequent presses oftbe LIGHT button cause the llluminavion
mode to toggle between enabled and disabled. Any keypress
illuminates the keypad for 5 seconds.
If in programming mode, the keypad will remain lit for 10
seconds.
Wben disabled, prexsing die LIGHT button enables the
illumination mode and ligbts the keypad.
Channel Numbers [0-9, 100] allow direct access m channels (page 24)
MODEcycles througb the 6 device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, AUDIO2). The mode indicator will be turned
off'if the remote control bas been left idle for more than 10
seconds.
EAVORffEallows access to Multi-Window function (page 31)
INEOallows access to Multi "W'mdowfunction (page 31)
MENUallows access m programming (page 21)
ENTERsets programming menu information (page 21)
A_' ! I_selects or adjusts programming menus (page 21)
[FAY]'<I_selects your favorite channels (page 26)
Volume=,_' adjusts the volume level
EXITexits programming menus (page 21)
ChannelA_' c?,<-lesthrough programmed channels (page 24)
CRRTNreturns m the last viewed channel (page 26)
RECALLdisplavs on-screen information(page 48)
MUTEmutes the sound (page 43)
INPUTselects video input source (page 40)
PIPallows access to PIP fimctions (page 29)
PIPturns the PiP on or off
PIPCHl,_' selects the PIP cbannels
MULTIallows access to Multi-Window function
griLL freezes the PIP
SOURCEselects the PIP source
LOCATEmoves the PiP
SWAPswitches the PIP and main pictures