Manual

Setting the sleep timer
The sleep timer turns off tile TV automatically.
To use the remote control to set the sleep timer:
Repeatedly press TIMER to set the number of minutes until the
TV turns off automatically (in 10-minute increments, to a
maximum of 180).
Note :
Todisplay the amount of time until the TV
turns off automatically, press TIMER once.
Toclose the display, press ENTER.
TIMER
30
To use the menu system to set the sleep timer:
1. Press TIMER (or MENU and • •) to display the CUSTOM
menu. TIMER will be highlighted.
2. After tile number position starts to blink, use tile channel
numbers to enter the length of time until the TV turns off.
3. Press ENTER to start the timer.
®@®©@@
CUSTOM
FAVORITE OH1
FAVORITE CH2
CH LABELING
VIDEO LABEL
BACKGROUND
To cancel the sleep timer:
Press TIMER until the number is set to 0, use the menu system
to set the timer to 0, or turn off the TV.
Setting the clock
To set tile clock:
1. Press MENU, and then press • or • until the SET UP menu
appears.
2. Press • or • to highlight CLOCK SET.
3. After the number position starts to blink, press the Number
buttons (0-9) to enter the correct time. The clock operates on a
12-hour cycle.
4. Press ENTER to start the clock.
®@®¢@®
SET UP
RECALL
POWER
TIMER
Number
MENU
ENTER
AT< I_
Note :
If the power source for the TVis interrupted
(for example, if the power cord is unplugged
or a power failure occurs), the clock will have
to be reset
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
To display the time on-screen:
Press RECALL.