Manual

Using the LOCKS menu
The LOCKS menu includes the V-chip, CH (channel) Lock, Video
Lock, and New PIN Code functions. You can use these functions only
after entering the correct PIN code.
Entering the PIN code
1. Press MENU, and then press • or • until the LOCKS menu
appears.
LOCKS
V CHiP
ENABLE BLOCKING OFF
TV RATING
MPAA RATING
BLOCKING OPTION
CH LOCK
VIDEO LOCK OFF
FRONTPANELLOCK OFF
NEW PIN CODE
• Blocking reset status (to store
a new PIN code):
Press the Channel Number
buttons (0-9) to store a new
4-digit PIN code, and then
press ENTER.
• When the PIN code is already
stored:
Press the Channel Number
buttons (0-9) to enter the PIN
code you previously stored,
and then press ENTER.
2. Press • or • to display the PIN code entering screen.
LOCKS @ LOCKS
If the wrong PIN code is entered, the message "Incorrect"
appears. Enter the code again, and then press ENTER.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press RECALL
four times within 5 seconds. The PIN code will be released
(blocking reset status).
®@®8@@
LOCKS
®
MPAA RATING _'
BLOCKING OPTION
CH LOCK P'
VIDEO LOCK OFF
FRONT PANEL LOCK OFF
NEW PIN CODE _'
Continue to set each item following the steps on the next page.
Changing the PIN code
1. From the LOCKS menu, select NEW PIN CODE.
2. Press the Channel Number buttons (0-9) to enter a 4-digit code.
The numbers you enter will replace the dashes in the display.
®@®8@®
LOCKS
V CHiP
ENABLE BLOCKING ON
TV RATING
MPAA RATING
BLOCKING OPTION
CH LOCK
VIDEO LOCK VIDEO
FRONTPANELLOCK OFF
3. Press ENTER. The new PIN code is now active.
Note:
The V-Chip function is available only for the
U.S. V-Chip system. The Canadian V-Chip
system is not supported.