Manual

®@®©®@
_SET UP
ANT1/2 ANT1
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
3. Press • or • to highlight your desired language.
Selecting the antenna input
You can connect to two different signal sources by choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input using the menu system:
1. Press MENU, then use • or • to highlight the SET UP menu.
2. Press • or • to highlight ANT 1/2.
_SET UP
LANGUAGE ENGL I SH
CH PROGRAM I*
ADD/ERASE ADD
MENU
AT4
3. Press • or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
To select the antenna input using the TV/VIDEO button:
Press TV/VIDEO on the remote control or TV (see illustrations
below) to highlight either ANT 1 or ANT 2, depending on the
antenna terminal you wish to use. The current signal source
displays in purple.
SOURCE SELECTION
0: ANT 1
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4: ColorStream
5: ANT 2
0- 5: TO SELECT
PressingTV/VIDEO on the remote control
displaysthis screen. Toselect,press 0-5.
SOURCE SELECTION
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
ColorStream
ANT 2
TV/VlDEO: TO SELECT
PressingTV/VIDEO on the TVdisplays
thisscreen. Toselect,press TV/VIDEO.
.oHeiTt..........
voL voL {_
TVNIDEO