User Guide
Table Of Contents
- Notice to Users
- Lineup of Our Manuals
- Before Reading This Manual
- CONTENTS
- Toshiba Quality is Second to None
- Features of the e-STUDIO2500c/3500c/3510c
- General Precautions
- Disclaimer Notice
- Forgery Prevention Function/Storage of Color Copies
- BEFORE USING EQUIPMENT
- HOW TO MAKE COPIES
- SETTING OF BASIC COPY MODES
- IMAGE ADJUSTMENT
- USING THE EDITING FUNCTIONS
- e-FILING
- TEMPLATE
- JOB STATUS
- BLINKING GRAPHIC SYMBOLS
- Blinking Graphic Symbols
- Drawer Display on the Touch Panel
- Replace Toner Cartridge Symbol
- Replace Toner Bag Symbol
- Jam Symbols
- Misfeed in the Reversing Automatic Document Feeder (optional)
- Misfeed in drawer feeding area
- Misfeed in the Large Capacity Feeder (optional)
- Misfeed in the Paper Feed Pedestal (optional)
- Misfeed on the bypass tray
- Misfeed in the automatic duplexing unit
- Misfeed in the jam releasing cover
- Misfeed in the fuser unit
- Misfeed in the Bridge Unit (optional)
- Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101, MJ-6101)
- Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit (optional: MJ-1030, MJ-6004)
- Misfeed in the Saddle Stitch Unit (optional)
- Call Service Symbol
- WHEN THIS MESSAGE APPEARS
- “Toner near Empty”
- “Time for Slit glass and Main charger cleaning”
- “Check staple cartridge”
- “Check staple cartridge in the Saddle Stitch Unit”
- “Examine stapler”
- “READY (CHECK STAPLER)”
- “Examine stapler in the Saddle Stitch Unit”
- “READY (CHECK SADDLE STITCH STAPLER)”
- “READY (HOLE PUNCH DUST BIN IS FULL)”
- “POWER FAILURE”
- “Time for periodic maintenance”
- “Check paper size setting on control panel for drawer N”
- “Cannot print this paper size Select the other drawer”
- “Cannot print this paper type Set the other paper type”
- “Reboot the machine”
- MAINTENANCE
- SPECIFICATIONS & OPTIONS
- INDEX
2 HOW TO MAKE COPIES
92 Proof Copy
Proof Copy
This function allows you to check that the copy density, zoom and margin width, etc. are properly
set by making only one set of copies.
You can prevent miscopying by using this function before committing yourself to mass-copying.
y The setting of the number of copy sets, page number, time stamp, sort/stapling (when the
optional Finisher has been installed) and hole punch (when the optional Hole Punch Unit has
been installed) can be changed after having made the proof copy.
y Press the [MEMORY CLEAR] button to clear the proof copy before changing the setting of
the zoom or copy density, etc. When you make copies again after changing the settings, the
data of the originals need to be scanned.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Select the copy modes as required.
4
Press the [PROOF COPY] button.
y “PROOF COPY is set Press START button to copy” appears. (for approx. 2 sec.)
y If “NON-SORT/NON-STAPLE” or “GROUP” is set as the finishing mode, the setting
will be changed to “SORT” automatically.
5
Press the [START] button.
The data scanning of the originals is
started and one set of copies is made.