User Guide
Table Of Contents
- Notice to Users
- Lineup of Our Manuals
- Before Reading This Manual
- CONTENTS
- Toshiba Quality is Second to None
- Features of the e-STUDIO2500c/3500c/3510c
- General Precautions
- Disclaimer Notice
- Forgery Prevention Function/Storage of Color Copies
- BEFORE USING EQUIPMENT
- HOW TO MAKE COPIES
- SETTING OF BASIC COPY MODES
- IMAGE ADJUSTMENT
- USING THE EDITING FUNCTIONS
- e-FILING
- TEMPLATE
- JOB STATUS
- BLINKING GRAPHIC SYMBOLS
- Blinking Graphic Symbols
- Drawer Display on the Touch Panel
- Replace Toner Cartridge Symbol
- Replace Toner Bag Symbol
- Jam Symbols
- Misfeed in the Reversing Automatic Document Feeder (optional)
- Misfeed in drawer feeding area
- Misfeed in the Large Capacity Feeder (optional)
- Misfeed in the Paper Feed Pedestal (optional)
- Misfeed on the bypass tray
- Misfeed in the automatic duplexing unit
- Misfeed in the jam releasing cover
- Misfeed in the fuser unit
- Misfeed in the Bridge Unit (optional)
- Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101, MJ-6101)
- Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit (optional: MJ-1030, MJ-6004)
- Misfeed in the Saddle Stitch Unit (optional)
- Call Service Symbol
- WHEN THIS MESSAGE APPEARS
- “Toner near Empty”
- “Time for Slit glass and Main charger cleaning”
- “Check staple cartridge”
- “Check staple cartridge in the Saddle Stitch Unit”
- “Examine stapler”
- “READY (CHECK STAPLER)”
- “Examine stapler in the Saddle Stitch Unit”
- “READY (CHECK SADDLE STITCH STAPLER)”
- “READY (HOLE PUNCH DUST BIN IS FULL)”
- “POWER FAILURE”
- “Time for periodic maintenance”
- “Check paper size setting on control panel for drawer N”
- “Cannot print this paper size Select the other drawer”
- “Cannot print this paper type Set the other paper type”
- “Reboot the machine”
- MAINTENANCE
- SPECIFICATIONS & OPTIONS
- INDEX
24 General Precautions
Other points
y Be very careful to treat the touch panel gently and never hit it. Breaking the surface could
cause malfunctions.
y Do not turn the power OFF with jammed paper left inside the Multifunctional Digital Color
Systems.
This could cause malfunctions when the main switch is turned ON next time.
To turn the power OFF, see P.47 “Turning power off (Shutdown)”.
y Be sure to turn the power OFF when leaving the office or if there is a power outage. How-
ever, Do not turn the power OFF if the weekly timer is in use.
To turn the power OFF, see P.47 “Turning power off (Shutdown)”.
y Be careful because the paper exit area and paper just after exiting are hot.
y Do not place anything other than paper on the receiving tray. This could disturb a normal
operation and cause malfunctions.
y Do not touch the photoconductive drum surface or the transfer charger. This could cause
image problems.
During maintenance or inspection
Warning
y Never attempt to repair, disassemble or modify the Multifunctional Digital Color Systems by
yourself. You could cause a fire or get an electric shock.
Always contact your Service representative for maintenance or repair of the internal parts of
the Multifunctional Digital Color Systems.
y Do not let liquids such as water and oil get into the system when cleaning the floor. This
could cause a fire and give you an electric shock.
Caution
y Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This
could cause a fire and give you an electric shock due to the heat released by electric leak-
age.
y Do not touch the stapling area. The actual needle point could cause you personal injury.
Saddle Stitch Finisher (optional) P.347
Finisher (optional) P.342
Other points
y Do not use such solvents as thinner or alcohol when cleaning the surface of the Multifunc-
tional Digital Color Systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
When handling supplies
Caution
y Never attempt to incinerate toner cartridges and toner bags. Dispose of used toner car-
tridges and toner bags in accordance with local regulations.
( P.296 “Replace Toner Cartridge Symbol”, P.303 “Replace Toner Bag Symbol”)