User Guide
Table Of Contents
- Notice to Users
- Lineup of Our Manuals
- Before Reading This Manual
- CONTENTS
- Toshiba Quality is Second to None
- Features of the e-STUDIO2500c/3500c/3510c
- General Precautions
- Disclaimer Notice
- Forgery Prevention Function/Storage of Color Copies
- BEFORE USING EQUIPMENT
- HOW TO MAKE COPIES
- SETTING OF BASIC COPY MODES
- IMAGE ADJUSTMENT
- USING THE EDITING FUNCTIONS
- e-FILING
- TEMPLATE
- JOB STATUS
- BLINKING GRAPHIC SYMBOLS
- Blinking Graphic Symbols
- Drawer Display on the Touch Panel
- Replace Toner Cartridge Symbol
- Replace Toner Bag Symbol
- Jam Symbols
- Misfeed in the Reversing Automatic Document Feeder (optional)
- Misfeed in drawer feeding area
- Misfeed in the Large Capacity Feeder (optional)
- Misfeed in the Paper Feed Pedestal (optional)
- Misfeed on the bypass tray
- Misfeed in the automatic duplexing unit
- Misfeed in the jam releasing cover
- Misfeed in the fuser unit
- Misfeed in the Bridge Unit (optional)
- Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101, MJ-6101)
- Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit (optional: MJ-1030, MJ-6004)
- Misfeed in the Saddle Stitch Unit (optional)
- Call Service Symbol
- WHEN THIS MESSAGE APPEARS
- “Toner near Empty”
- “Time for Slit glass and Main charger cleaning”
- “Check staple cartridge”
- “Check staple cartridge in the Saddle Stitch Unit”
- “Examine stapler”
- “READY (CHECK STAPLER)”
- “Examine stapler in the Saddle Stitch Unit”
- “READY (CHECK SADDLE STITCH STAPLER)”
- “READY (HOLE PUNCH DUST BIN IS FULL)”
- “POWER FAILURE”
- “Time for periodic maintenance”
- “Check paper size setting on control panel for drawer N”
- “Cannot print this paper size Select the other drawer”
- “Cannot print this paper type Set the other paper type”
- “Reboot the machine”
- MAINTENANCE
- SPECIFICATIONS & OPTIONS
- INDEX
5 USING THE EDITING FUNCTIONS
176 EDITING
6
Enter the values read in step 5 for the specified area, and then
press the [SET] button. Set 4 values in order.
y After the setting of 4 values is finished, the next edit area menu is displayed. Repeat
steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an
original.
y To correct the value which has been set, press the [RESET] button. Pressing it once
makes the highlighted field move one position upward. Highlight the field in which you
want to rectify the value, and then key in the correct one.
7
Press the [ENTER] button after specifying the area.
9
Press the [START] button.
8
Place the original(s) with its
face down.
y Set the original with its face down
and bottom toward you and fit its top
left corner against that of the original
glass.
y Select other copy modes as
required.