User Guide

Twin Color (2-Color) Copy 151
6
Adjust the color balance or the red-and-black area adjustment as
required. Press the [ENTER] button after adjustment.
A: Red color balance adjustment
Press the or button of the desired color to adjust the red color balance.
B: Red/Black area adjustment
Press the or button to adjust the area to be copied in red or black. When you set
the red area larger, the area copied in red becomes larger. When you set the black area
larger, the area copied in black becomes larger.
Each the color balance of yellow and magenta on every density area can be adjusted by
your pressing the [DETAIL] button.
For example, when you adjust the high density area of magenta (M) to side, magenta
in its high density area becomes darker. When you adjust the low density area of
magenta (M) to side, magenta in its low density area becomes lighter.
7
Select other copy modes as required, and then press the [START]
button.
Canceling color balance adjustment
y Set the color balance of the color you want to cancel its adjustment to , and then press the
[ENTER] button.
y If you want to cancel the adjustment of all colors, press the [DEFAULT] button, and then
press the [ENTER] button.
A B