Specifications

37
CONTROLS AND FEATURES
English
Setting up the Media Renderer
feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR. When
operating as a DMR, the TV displays content
provided by a DMS. The selection of the media is
done by the DMC - the TV does not select the input.
The TV can play photo, movie, or audio files when
operating as a DMR.
You can configure the DMR settings individually, or use
Installation mode to be prompted for each setting in order.
a In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
b Press B or b to highlight Installation, and press OK.
c Press C or c to select On, and press OK.
d If you want to change the device name as a Renderer,
highlight the Device Name field and press OK. The
Software Keyboard window will appear.
e Input the Device Name by using the Software
Keyboard (see page 36). Press the BLUE button.
NOTE: The Device Name can be up to 127 characters
long.
f Highlight Done, and then press OK to save your
setting.
g If you want to change the password, press C or c to
select Yes, and then press OK.
h Change the password by using the Software
Keyboard (see page 36), and then press the BLUE
button.
NOTE: The Web Password can be up to 15 characters
long.
i Highlight Done, and then press OK.
j If you want to limit access from unexpected DMCs,
press
C or c to select On, and then press OK.
k If you want to proceed with registration of DMCs,
press
C or c to select Yes, and then press OK.
l Press B or b to highlight the item you want to
accept, and press OK. A check will appear in the box.
To remove the check, press OK again.
m Press c to highlight Done, and then press OK.
n The Maximum Volume Setup window appears. Press
C or c to adjust to the desired volume. Then, press
OK.
a In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
b Press B or b to highlight Media Renderer, and then
press
C or c to select On or Off.
The TV’s DMR device name can be changed. The device name can
be confirmed from the DMC.
a In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
b Press B or b to highlight Device Name Setup, and
press OK.
c Highlight the Device Name field and press OK. The
Software Keyboard window will appear.
d Input the Device Name by using the Software
Keyboard (see page 36). Press the BLUE button.
NOTE: The Device Name can be up to 127 characters
long.
e Highlight Done, and then press OK to save your
setting.
Installation
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Media Renderer
Device Name Setup