User`s manual

User’s Manual EN-17
STOR.E TV+
Network connection and setup
This device can play the files stored on the network directly through a
router hub. Connect the LAN cable according to the following illustration.
There is a strong network connection when the LAN active indicator glows
and the Link indicator blinks.
(Sample Illustration) Network connection
In order to connect to and setup the network, follow the above connection
illustration and the steps as described below:
1. Connect one LAN cable to your computer and another LAN cable to
STOR.E TV+.
2. Connect STOR.E TV+ to TV via AV cable or HDMI cable.
3. Press the SETUP button on the remote control or select Setup menu in
the initialization interface.
4. Select Network option in the setup window and press OK to confirm.
5. Setup IP automatically or manually. Refer to “Network Setup” on
page 33 for more information about the methods of setting up network.
6. Press SETUP button again to exit after setup.
LAN portLAN cable
LAN port
LAN cable
HDMI cable HDMI port
AC adaptor cable
Before accessing the computer through network via STOR.E TV+, the
media files must be shared on the network. Please refer to “Setup of media
file sharing on the computer” on page 20 for more information about how to
setup of media file sharing on the computer.
NOTE