User’s Manual STOR.
STOR.E TV+ Contents User’s Manual Introduction..................................................................................................4 Package Content.........................................................................................4 Safety Instructions.......................................................................................4 Computer Requirements .............................................................................5 TV/Stereo device Requirements ...................
STOR.E TV+ TOSHIBA Support .................................................................................... 52 Regulatory Information ............................................................................. 52 REACH ..................................................................................................... 54 Additional Information ...............................................................................
STOR.E TV+ Introduction Welcome and thank you for choosing a TOSHIBA product. For your convenience, your TOSHIBA product is furnished with two guides: ■ A Quick Start Guide, and ■ this comprehensive PDF User’s Manual which is pre-stored in your product. We recommend to backup this User’s Manual onto a CD or your local drive, directly after the drive being installed. Package Content Check to make sure you have all of the following items: Power adaptor STOR.
STOR.E TV+ ■ ■ ■ ■ bump, drop or jar the drive move the drive while operating, as data damage may happen use other connectors than USB 2.
STOR.E TV+ Product Overview This device is a new type of family high-definition home video player, which can play your favorite pictures, audio/videos files from the built-in Hard Disk Drive, external storage device, memory card including SD (Secure Digital) card, MMC (MultiMediaCard) and MS (Memory Stick) or network, to a connected audio/video playback device. Quick Tour This section identifies the various components of the STOR.E TV+.
STOR.E TV+ Back view USB port USB DEVICE port HDMI port LAN port Coaxial cable jack AV jack DC IN jack (Sample Illustration) Connections on the rear side of STOR.E TV+ User’s Manual Component Description USB DEVICE port Use this USB port for communication with the computer. STOR.E TV+ is also a personal multimedia files storage device and can be used by connecting to the computer via this USB DEVICE port.
STOR.E TV+ Side View USB port 3-in-1 card reader slot (Sample Illustration) Connections on the side of STOR.
STOR.E TV+ Remote control User’s Manual Button Icon Function POWER Turns device on or off MUTE Turns the device sound off TV SYSTEM Switches between NTSC, PAL, 480P, 576P, 720P 50Hz, 720P 60Hz, 1080i 50Hz and 1080i 60Hz, 1080P 50Hz, 1080P 60Hz.
STOR.
STOR.
STOR.E TV+ Getting Started Check the Quick Start Guide illustration to setup your device properly. Connecting the power adaptor 1. Choose the proper plug to attach to an AC adaptor. To install the AC adaptor replaceable plug, see the illustrations below. 3 2 1 3 2 (Sample Illustration) Installing the plugs To remove the replaceable plugs, see the illustrations below.
STOR.E TV+ 2. Plug the AC adaptor cord/cable into the DC-IN on the back of the STOR.E TV+. (Sample Illustration) Connecting the AC adaptor cord to STOR.E TV+ 3. Connect the power plug to a live electrical outlet. The power light on the front panel glows red when the STOR.E TV+ is powered on. NOTE User’s Manual Always make sure that the STOR.E TV+ is power on before connecting to other external devices.
STOR.E TV+ Connecting to the audio/video device STOR.E TV+ connects to the different external device via composite (AV), HDMI, or coaxial ports for audio/video output. Composite AV output connection AC adaptor cable AV cable AV jack (Sample Illustration) Composite AV output connection To connect the device to TV: 1. Plug the yellow connector into the AV output of the device and AV input on the TV. 2. Plug the red and white connector into the audio input of TV or HIFI. 3.
STOR.E TV+ HDMI output connection HDMI is a output port with superior audio and video effects which outputs digital video and audio composited at the same time. AC adaptor cable HDMI cable HDMI port (Sample Illustration) HDMI output connection To connect to a display device via HDMI cable: 1. Connect the HDMI cable to the output port of the STOR.E TV+ and input port of the display device. 2 Select HDMI mode in the TV until it displays the initialization interface.
STOR.E TV+ Coaxial output connection AC adaptor cable Coaxial cable Coaxial cable jack (Sample Illustration) Coaxial output connection To connect to an audio device via coaxial cable: 1. Connect the coaxial cable to the coaxial cable port on the STOR.E TV+ and the input port of the audio device. 2. Enter the STOR.E TV+’s audio interface and select the Digital Output SPDIF LPCM or SPDIF RAW option (to access, select Setup -> Audio -> Digital Output).
STOR.E TV+ Network connection and setup This device can play the files stored on the network directly through a router hub. Connect the LAN cable according to the following illustration. There is a strong network connection when the LAN active indicator glows and the Link indicator blinks.
STOR.E TV+ Use of 3-in-1 card reader and USB port STOR.E TV+ has the ability to expand its large storage. The USB port can read external mobile hard drives/camcorders/DVD drives and the memory card slot lets you insert an SD/MMC/Memory Stick card. You can play a variety of high-definition formats, high-fidelity audio and video files stored in external storage devices directly through the USB port interface or the memory card slot.
STOR.E TV+ Connecting to the computer via USB interface STOR.E TV+ is also a personal multimedia files storage device and can be used by connecting to the computer via USB interface. AC adaptor cable USB DEVICE port USB cable USB port (Sample Illustration) USB interface connecting to the computer To connect and use STOR.E TV+, please follow the steps as detailed below: 1. Power on STOR.E TV+ first, then connect to the computer after the menu has displayed. STOR.
STOR.E TV+ Setup of media file sharing on the computer Two conditions are necessary for successful playback through the network connection. ■ Folder sharing and safety setup. ■ The same gateway and subnet mark addresses are set. Operation of file sharing using Windows XP 1. Right click on the folder that you would like to share and select the Sharing and safety option. 2. Click Sharing in the property option and select Share this folder on the network, then click Apply to confirm and exit. 3.
STOR.E TV+ Operation of file sharing using Windows 7 1. Use the Win7 operation system under a user account with administrator rights. 2. Click Control panel -> Network and Internet -> Network and Sharing Center -> Advanced Sharing Settings. Select Turn on file and printer sharing. 3. Right click on the folder that you want to share and select Properties. 4. In the Sharing tab, click Share. 5. In the drop down menu, select the user name with which you want to enable sharing and click Add. Then click Share.
STOR.E TV+ First Boot When STOR.E TV+ is booted up for the first time, you will need to select your language and the TV system output using the remote control. Use the navigation keys on the remote control to select the language you wish to use and press OK. If your language is not available, check the “System Firmware Upgrade” on page 45 section as Toshiba may provide other languages through a firmware update. Not all languages are supported.
STOR.E TV+ Operating STOR.E TV+ The background color of the icon on the screen indicates three kinds of state. Highlighted: that shows the icon is effective. Dim: that shows the icon is noneffective. White: that shows the icon is selected. Main Interface The main interface allows you to access internal Hard Disk content (STOR.E TV+), external USB Device content (USB), memory card, external DVD, playlist, shared files on the network, UPnP® playback share files and the setup menu (Setup).
STOR.E TV+ (Sample Image) Main interface Local HDD From this menu, you can browse the internal Hard Drive content. Press OK to confirm. USB Device From this menu, you can browse the external USB Device content. Press OK to confirm. If no USB Device is connected on the USB port, there will be no USB device folder shown. Memory Card From this menu, you can browse the memory card content. Press OK to confirm. If no memory card is inserted into the card slot, there will be no memory card folder shown.
STOR.E TV+ Playlist STOR.E TV+ supports the playlist function, which allows you to add your favorite content to a playlist. The playlist allows you to select music, photos and videos stored on Local HDD, USB device and Memory card. To build your playlist, select the file and press SELECT on the remote control. A tick will indicate the file selected. More than one file can be selected. Then press CONFIRM to add the selected files to the playlist.
STOR.E TV+ 3. Share files by setting the software. After installing the software, open the software’s interface, choose Media Base in the main interface of the software, and then choose Add to the media base in the pull-down menu. After adding some documents or folders to the media base, choose Media share in the pull-down menu. You can also set the types and positions for the shared files, such as Music, Picture and Video, etc. 4. Use STOR.E TV+’s UPnP® playback function.
STOR.E TV+ Supported Audio Formats ■ MP3, WMA, WAV, AAC, OGG, FLAC, LPCM, Dolby Digital, DTS Digital Picture Display Enter the desired folder and click the PHOTO button on the remote control to enter the photo display mode. To playback photos: ■ Click the navigation keys to select the folder containing your photo files. ■ Click the navigation keys to select the photo you want to view. A preview of the file will appear. Then click OK. The photo is displayed in full screen mode.
STOR.E TV+ Video Playback Enter the desired folder and click the MOVIE button on the remote control to enter the movie play mode. To playback a movie: ■ Press the navigation keys to select the folder(s) containing your movie files. ■ Press the navigation keys to select the movie you want to view. A preview of the file will appear. Then press OK. The movie is played in full screen mode.
STOR.E TV+ File Edit menu Select the file or folder by pressing the navigation buttons. Edit will be displayed and files can be renamed, deleted or copied. Return key Select to return to the main screen. Rename function To rename a file: 1. Press and on the remote control to select the Rename tab from the menu bar. 2. Press OK on the remote control. The name entry screen appears. 3. Use the navigation arrows to select letters and numbers. Select CAPS to toggle between uppercase and lowercase letters.
STOR.E TV+ 1. Select Source Device After entering the File copy mode, press / to select the device containing the file to be copied. Press to select Destination Device, or press to return. 2. Select Destination Device Once destination device list is shown, press / to select the destination device. Press to go to the next step, or press to return. 3. Select files or folders to be copied When Source device is displayed, press / to toggle and press SELECT to select file or folders to be copied.
STOR.E TV+ Video Setup ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ User’s Manual Brightness: Selects brightness levels. Contrast: Selects contrast levels. Hue: Selects hue levels. Saturation: Selects saturation levels. Movie preview: On/Off. Allows movies to be previewed. Resume Play: On/Off. When a movie paused, the device will record the time that the movie is paused and the next user can choose “Resume Play” to continue from the last pause point to resume playback.
STOR.E TV+ Audio Setup ■ Night Mode: On, Off and Comfort modes. In comfort mode, it restricted volume automatically. ■ Digital Output: HDMI LPCM: Digital audio signal is decoded by the product outputs through HDMI 2.0 channel. HDMI LPCM MULTI CH: Digital audio signal is decoded by the product outputs through HDMI 5.1 channel. HDMI RAW: The raw digital signal of multimedia data is directly outputted through HDMI. When this function is enabled, the remote control can not be used to adjust the volume.
STOR.E TV+ Network Setup Wired Lan Setup Allow STOR.E TV+ to access a LAN, press the SETUP key on the remote control to enter the setting interface of STOR.E TV+. Select Network and enter Wired Lan Setup. You can choose automatic or manual mode for setup. (Sample Image) Wired Lan Setup interface DHCP IP (AUTO) To obtain the IP address of the domain name server automatically, select DHCP IP (AUTO) and then select OK according to the instructions. The following picture will be shown.
STOR.E TV+ If no IP address is shown on the screen, the connection was unsuccessful, and you will need to check the network to which you are connected to determine whether the settings meet the necessary requirements. Then repeat the above process to obtain an IP address again. FIX IP (MANUAL) To obtain the IP address of the domain name server manually, select FIX IP (MANUAL) and then select OK according to the instructions.
STOR.E TV+ Wireless Setup To enable this function, a compatible USB WiFi dongle that supports 802.11 b/g/n must be used. Indeed, some models could not work with this device. First, insert it into the device’s USB port interface. Wifi Plug-in will be displayed on the screen for several seconds. Second, ensure your computer and the device are in range of the same WLAN. You can refer to the following connection.
STOR.E TV+ Infrastructure mode Infrastructure mode is used to connect computers with wireless network adaptors, also known as wireless clients, to an existing wired network with the help of a wireless router or access point. Select the access point you wish to access from the SSID list shown below. (Sample Image) SSID list NOTE In the Security list, WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) indicate the network is encrypted, i.e. an encryption key is needed to access the network.
STOR.E TV+ (Sample Image) WLAN Security Setting 2. Selects automatic or manual mode to obtain the IP address. Refer to “DHCP IP (AUTO)” on page 33 and “FIX IP (MANUAL)” on page 34 section for more details. 3. Setting List The Setting List displays the network settings as below.
STOR.E TV+ 4. Test Connection. The test will take a while. If the test is successful, the network information will be displayed as below. (Sample Image) Network information Peer to Peer mode Peer to Peer mode, also called Ad Hoc or computer-to-computer mode, is used to connect wireless clients together directly, without a wireless router or access point.
STOR.E TV+ 1. Ad Hoc Setup Sets Wireless SSID, Wireless Security, and Host IP for the Ad Hoc connection. (Sample Image) Ad-Hoc Setup NOTE Both STOR.E TV+ and computer must be in Ad Hoc mode, share a common SSID, and be within the same IP range. 2. Select wireless ID and press OK. You can rename the wireless ID using the keyboard.
STOR.E TV+ 3. Save and startup. Select the Confirm icon in the interface and press OK or COMFIRM on the remote control to show the setting information below. (Sample Image) Ad-Hoc mode setting list 4. Test Connection. If the test is successful, the network information will be displayed as below.
STOR.E TV+ PPPoE Setup PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by many ADSL Internet Service Providers. If your ISP uses PPPoE, but has given you a router, you may need a PPPoE client on your Linux box. DHCP may work fine. The device is ideal for users with a DSL modem whose Internet service provider uses PPPoE. Before you use this function, ensure it is really necessary.
STOR.E TV+ Select Network in the main interface of the device. If there are open groups in the sharable network, other sharable working group folders, such as WORKGROUP, will be shown in addition to My_Shortcuts. This image is shown as below: (Sample Image) Accessing the network Select and enter a corresponding folder, to play multimedia content shared on the computer’s network. If there are no other sharable folders, follow the steps below to access the new sharable content on the network: 1.
STOR.E TV+ 2. Input Net User ID and Password. (Sample Image) Inputting Net User ID, Password User name is GUEST or EVERYONE and the IP address of the appointed document server is the IP address of the computer that has enabled network sharing. As there can be multiple shared computers on the network, input the IP address of computer you want to access. 3. When these settings are complete, you can browse photos, listen to music, and watch videos through the network account.
STOR.E TV+ The usage of Samba STOR.E TV+ contains an operating system (Linux+AP) and application software (Samba). STOR.E TV+ supports the function of Samba through which you can visit your hard disk’s files in your device directly. It is necessary to make your computer and device in the same network. Before using this function, it must connect STOR.E TV+ and the computer to the network. Setting IP address You can obtain device’s IP address according to Network Setup process described above.
STOR.E TV+ System Firmware Upgrade The Firmware is the program that internally controls STOR.E TV+ (media files playback, user interface, configuration). You may need to upgrade your firmware to improve your experience with new features or to fix some issues. NOTE Make sure that the power adaptor of STOR.E TV+ is always connected and do not remove the USB device during the firmware upgrade.
STOR.E TV+ Frequently Asked Questions (FAQ) Display issues Question 1: What do I do if the screen is too dark or display is not clear? Answer: Adjust the brightness in Setup -> Video -> Brightness. Avoid placing the device in direct, bright light. Question 2: When booting up, why does a short flash, blue screen or screen saver appear on the TV? Answer: This is normal. When the system is initializing, it will setup the corresponding parameters so it can output the correct video signal to the TV.
STOR.E TV+ Answer: Close all programs that might be accessing data on STOR.E TV+, including Windows or Internet Explorer. If this does not work, close all programs and wait 20 seconds, then try again. If it still does not work, you can shut down STOR.E TV+ and disconnect the USB cable. Question 3: If connecting the STOR.E TV+ to the computer first, then boot the computer, some computers may be not able to start up. Answer: 1.
STOR.E TV+ 6. If you want to access files that are stored on a USB data storage device which is connected to a router and thus made available as network storage, please note that you must set up a connection to the drive using “My_Shortcuts”. To do so, you must enter the IP address of your router as well as the user name and the password necessary to access the network storage. Hardware issues Question 1: While using STOR.E TV+, it no longer responds to my commands.
STOR.E TV+ Others Product accessories of products may be different for this series of products vary according different series and models. Please refer to packing list or contact your agent for information. Pleas understand no advance notice for further product improvement, appearance design and specification update. The illustration may be a little different from the real product. Specifications User’s Manual General Information Description Hard disk support Standard SATA 8.9 cm/3.
STOR.E TV+ Supported video, audio and picture formats are as below: DECODE VIDEO FORMARTS RESOLUTION DAT 320 x 240 MPG 720 x 576 VOB 720 x 576 MPG 1920 x 1080P TS/M2TS/TP/TRP 1920 x 1080P AVI 1920 x 1080P MP4 1920 x 1080P MKV 1920 x 1080P VC-1 WMV9 1920 x 1080P RM/RMVB RM/RMVB 1920 x 1080P H.
STOR.E TV+ Supported subtitle formats are as below: NOTE SSA Support SMI Support SRT Support SUB Support IDX+SUB Support (support DVD files only) Appearance and specification may vary and can be changed without notice. Trademarks Windows, Microsoft and Windows logo are registered trademarks of Microsoft Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
STOR.E TV+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
STOR.E TV+ Indication of restrictions of use France Outdoor use limited to Military Radiolocation use. 10m W.e.i.r.p. within the Refarming of the 2.4GHz has band 2454-2483.5 MHz been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 Italy - For private use, a general authorisation is required if WAS/RLAN ? s are used outside own premises.
STOR.E TV+ Additional environments not related to EMC Outdoor use: As a typical home/office equipment this product has no special resistance against ingress of moisture and is not strong shock proofed. Explosive atmosphere: The use of this product in such special working environment (Ex) is not allowed.
STOR.E TV+ Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
STOR.E TV+_UM_V1_0610 For more information, please visit: www.toshiba-multimedia.
