Operation Manual

Repeat playback/A-B repeat playback

Enabling repeat playback (DVD/VCD)

You can choose to repeat DVD playback by title or chapter. For VCDs, you can repeat a single

track or the entire disc.

Press PLAY MODE during playback or stop mode.

DVD

Press ENTER/CH LIST repeatedly to select a

repeat mode. It can either be by Chapter or by Title.

The TV automatically starts repeat playback after

finishing the current title or chapter.

VCD

Press to select Repeat, and then press

ENTER/CH LIST repeatedly to select a repeat

mode. It can either be Single or All.

Note:

If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

Press PLAY MODE again to close the Play Mode window.

To resume normal playback:

Select Off in step 2 above.

Note:

• The Repeat playback function may not apply to some discs.

• Chapter/Track function is cancelled when the SKIP or SKIP button is pressed.

• The Repeat playback function is not applicable to PBC-enabled VCDs.

Enabling A-B repeat playback (DVD/VCD/Audio CD)

The A-B repeat function lets you repeat a specific section between two set points.

During playback, press REPEAT A-B at the

point where you would like the playback loop to begin.

This sets your “A” point.

When the playback reaches the point where you would like the playback loop to stop, press

REPEAT A-B again. This sets your “B” point.

The section between points A and B will be played

repeatedly in a loop until you turn off the Repeat A-B

mode.

To resume normal playback:

Press REPEAT A-B until Off appears on the screen.

Note:

• In some cases, subtitles for the repeated scene may not display.

• The A-B repeat mode may not apply to some DVD scenes.

• The A-B repeat mode is not applicable to interactive DVDs and JPEG CDs.

Repeat : Title

[DVD]

Play Mode

[Video CD]

Mode : Normal

Repeat : Off

Play Mode