Operation Manual

20
Changing the order of stored channels
Note:
When changing the
order of channels, it is
best to start with Ch1.
Changing the order of stored channels
The Automatic station presetting stores channels in a specific order. However, this order can be
changed if you wish.
1
Press MENU SETUP or DIGITAL MENU to display the Main Menu screen.
Select Channel, and then press ENTER/CH LIST .
2
Press to select Ch Allocation, and then press ENTER/CH LIST .
3
Press to select a channel allocation option, and
then press ENTER/CH LIST .
4
After configuring the channel allocation options, press MENU SETUP to return to Ch
Allocation menu, or press EXIT/CANCEL to return to the normal screen.
There are several options to customise your channel allocation settings:
Sort
Press to select the channel that you want to move, and then press to move the channel
label to the left side of the list. Press to select the position that you want to move the channel
to, and then press to confirm the move.
Erase Programme
Press to select the channel that you want to erase, and then press
ENTER/CH LIST .
Lock
This feature enables you to lock any channel you choose by pressing ENTER/CH LIST , and
then enter the parental lock password. If you have not set the parental lock password, you can use
the initial password “0000”.
Skip
Press to select the channel that you want to skip, and then press ENTER/CH LIST . A
mark will appear.
Ch Label
Channel Number: Press to select a channel that you want to renumber, and then press
ENTER/CH LIST . Use the number buttons 0-9 to input the number that you prefer for the
selected programme. If the number you key in has already existed, a warning message will
appear, and you should try another one.
Ch Label: Press to select a channel that you want to rename, and then press to
select Ch Label. Press repeatedly until the character you want appears in the first place.
When the character you want appears, press ENTER/CH LIST . Repeat this step to enter the
rest of the characters.
Label Clear: If you want to remove the channel label, press to select Label Clear, and
then press ENTER/CH LIST .
/
/
Ch Allocation
Erase Programme
Skip
Ch Label
Lock
Sort
/
/
/
/
/
/
/
/
/