Manual

Connectinga personal computer
if'C)
With either the PC IN or HDM[ connection, you can watch
your computer's display on the TV and hear the sound from
the TV's speakers,
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV.
use im analog RGB (15-pin) computer cable and a PC audio
cable,
HDMI IN _ SERVICE
t -V
PC audio
cable
Conversionadapter
(if necessary)
• To use a PC, set the monitor output resolution on the PC
before connecting it to the TV, The following signals can
be displayed:
VGA 640 x 480 60Hz
SVGA 800 x 600 60Hz
XGA 1024 x 768 60Hz
WXGA 1280 x 768 60Hz
WXGA 1360 x 768 60Hz
Other formats or non-standard signals will not be displayed
correctly.
• To display the optimum picture, use the PC setting feature
(tee,"Using the PC settings feature" on page 40).
Note:
• The PC audio input terminals on the TVare shared with the
HDMI 1 analog audio input terminals (_, page 41).
Some PC models cannot be connected to this T_
An adapter is not needed for computers with a compatible
mini D-sub 15-pin terminal.
• An adapter is not needed for computers with a compatible
mini D-sub 15-pin terminal,
Depending on the DVD's title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes,
• Signal names for mini [)-sub 15-pin connector
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3 B 8 Ground 13 H-sync
4 NC* 9 NC 14 V-sync
5 NC l0 Ground 15 NC
_NC=Not connected
If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV. use
an HDM[-to DVI[ adapter cable and analog audio cables ( PC
[N AUDIO port just shared with DV[ signal from HDMII
port only). [f connecting a PC with im HDMI terminal, use im
HDM[ cable (type A connector), Separate analog cables am
not necessa U (tee,page 17),
Computer
HDMI iN _ SERVICE
H_ml PC iN
J^0DIO RGB I
PCaudio
cable
PCaudio
output
The HDMI 1 input can accept and display VGA, SVGA,
XGA, 480i (60Hz), 48% (60Hz), 720p (60Hz), and 1080i
(60Hz) signal formats. For detailed signal specifications, see
page 49.
Note:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctl_z
19