Manual

Connectin a DVDplayer with ColorStream®(componentvideo), a VCR,
and a satellite receiver
Yore TV has two sets of ColorStream (_(component video) inputs.
COMPONEt,rrVIDEOS.VlD[O VI_EO
our OUT
DVD player with componentvideo
From satellite dish
Satellite receiver with componentvideo
You will need:
• coaxial cables
• standardA/V cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same tliT_eor the picture
performance will be unacceptable.
- If you have a mono VCR, connect L/MONO on the TV
to your VCR's audio out terminal using the white audio
cable only.
• standard audio cables
• component video cables
- You can connect the component video cables (plus
audio cables) from the DVD player or satellite receiver to
either set of Oo!or_tream terminals on the TV (biD 1 or
HD 2). The ColorStream HD 1 and lid 2 terminals can
be used with Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems. A 1080i signal will provide
the best picture performance (1080p is not supported).
- If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel. If your DVD player has HDMI
video, see page 17.
To view antenna or Cable channels:
Select the ANT video input source on the TV.*
To view the I)VD player:
Turn ON the DVD playe_: Select the ColorStream HD 1
video input source on the TV.*
L-J
Stereo VCR
Fromantenna
To view satellite programs using the component
video connections:
Tnrn on the satellite receiver. Select the ColorStream HD 2
video input source on the TV.*
To view the VCR or view and record antenna chan-
nels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a I)VD:
Tnrn ON the VCR_ Tnne the VCR to the channel to record.
Select the eolorStrearn Hi)1 video input source on the TV*
to view the DVD.
Te select the video input source, press iNPUT on the remote
control (_= page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws o_ the United States
and other countries, and may subject you to civil and criminal
liability.
15