User's Manual

Connecting a VCR and antenna, Cable TV or Camcorder
Camcorder
_ _ TV back panel
You will need:
• Coaxial cables
• Standard A/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
• Standard audio cables (If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV.
To view the antenna o1" Cable signal:
Select the ANT/CABLEvideo input source on the TV.*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLEvideo
input source on the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the Videovideo input
source on the TV.*
To view the camcorder video:
Select the Videovideo input source on the TV.*
* To select the video input source, press _ on the
remote control (__._page 21).
Theunauthorizedrecording, use,distribution, or revision
of televisionprograms,videotapes,DVDs,and other
materialsis prohibitedunder the CopyrightLawsof the
UnitedStatesand othercountries,and may subjectyou
to civil and criminal liability.
14