Manual

SelecUngthe video input source
to view
To select the video input source to view:
1 Press _ on the remote control or TV control
panel.
2 And then either:
a) Press 0-5; or
b) Repeatedly press &IV on the remote control
and then press @ to change the input; or
c) Repeatedly press _ on the remote control
or TV control panel to change the input.
The current signal source displays in the top right
corner of the Input Selection screen.
No te:
. You can label the video input sources
according to the specific devices you have
connected to the TV(_ "Labeling the video
input soumes" at right).
° Sources can be "hidden" (_ "Labeling the
video input soumes" at right).
° "No Video Signal" will appear randomly on the
screen if no signal is received in video input
mode.
° If CEC device is connected to a HDMI input,
the REGZA-LINK icon will appea_
If a REGZA-LINK device with HDMI
switching capability (e.g. Audio Receiver) is
connected to the HDMI input:
Press _ on the remote or TV control panel
repeatedly to highlight HDMI1 or HDMI2.
[f the connected CEC device has any connected
devices, a separate device selection popup window
will appear.
Press _ repeatedly to highlight the desired input
EXIT
source, and then press ©.
Note:
° When selecting REGZA-L/NK input sources
from the popup window using _, some
REGZA -L INK de vices may automa tically turn
on.
. When selecting input sources using & V,
you will have to press @ to actually select a
particular device from the popup windo_z
Labelingthe video inputsources
You can label each video input source according to
the type of device you connected to each source,
from the following preset list of labels:
. - - (d@_.Ir label)
. Audio Receiver
. Cable
. Compact Disc
. DTV
. DVD
* Game Console
. HDM[ Switch (HDM[ inputs only)
. Laser Disc
. Satellite/DSS
. VCR
* Video Recorder
. Hkte (to hide an unused input in the Jnpnt Selection
screen and in the Channel Browser TM Inputs list)
Note: If you select PC in the Input Selection
screen, you can choose only "- -", "Game
Console", or "Hide" as the label.
To label the video input sources:
MENU
1 Press 0 and open the Preferences menu.
Highlight input Labelingand press @.