Manual

Viewing the system status
To view the system status:
1 MENU
Press © and open the Setup menu.
2 Highlight Installati0nand press @.
3 A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
information, and press @.
4 Press 4_ to scroll through the menu bar to select
the FactoryDefaults or Support informationand
view the related information.
To close the screen and return to the
Installation menu:
Highlight DONE and press @.
To return to normal viewing:
EXIT
Press O.
ResetFactoryDefaults
To reset all settings and channels to their
factory default values:
MENUPress O and open the Setup menu.
Highlight installationand press @. A new set of
Installation menu icons will appear.
3 Open the System Status menu, highlight System
information, and press @.
4 Press 411_to scroll through the menu bar to select
Factory Defaults.
5 Highlight Yesand press @.
6 (If PIN c(×te has been set, enter your PIN code. Press
a{ or _ to select D0ue and press @.) A warning
message will appeal: select Yes and press @, the TV
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select NO and press @ in step 5 above.
28