User's Manual

7. LOADING THE LABEL
ENGLISH VERSION EOl-33014
7.1 HOW KI load the lmer backed label roll
7. LOADING THE LABEL
7.1 How to load the liner backed label roll
1. Place the printer on the level surface as shown below.
2. To unlock the media cover, press the two cover release catches in the directions of the arrows.
3. Open the media cover by pushing up the strip cover.
Media Cover Release catch
0
Media Cover
Media Cover
Releace catch
Fig. 7-l
4.
Fully raise up the release lever, and then slide the paper guide (R) to the right.
Paper Gu;de (R)
Release Lever
Fig. 7-2
E7-1