User's Manual

7. LOADING THE LABEL
ENGLISH VERSION E01-33014
7.1 How to load the liner backed label roll
8. Push down the media cover until the two cover release catches click and they are put in the lock
position.
NOTE:
If
the media
performed.
cover is open and unlocked, an error will result and the printing will not be
Fig. 7-6
9. In case of the strip issue, pull out the top of the liner of the label roll to eliminate the slack from the
label roll.
[How to remove the liner backed label roll]
1. Open the media cover.
2. Fully raise up the release lever, slide the paper guide (R) to the right, and then remove the liner
backed label roll.
E7-3