Operation Manual

4. PROGRAMMING OPERATIONS EO1-11154
4.20 Foreign Currency Exchange Rate Setting
4-60
4.20 Foreign Currency Exchange Rate Setting
In this program, the rate of each foreign currency (corresponding to the [CUR1] to [CUR5] keys) will be set. By
setting a rate on each Foreign Currency Key, reading the sale total and tendering in the foreign currency value
will be possible for sale finalization.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode
Depress [↓] three times then [Enter].
or
Depress [4].
“4 RATE, LIMIT AMOUNT” is selected.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 CUR EXCHANGE RATE” is selected.
Input the rate of [CUR1] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR2] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR3] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR4] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR5] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTE: When inputting 0, the rate of the foreign currency will be cancelled. If doing so, the rate of the foreign
currency should be set at the registration operation.
OPERATION
CONDITION