User's Manual

1 SETTING UP WIRELESS NETWORK
26 Setting Up the Infrastructure Mode
3
Enter the following items and press the [NEXT].
y
[EAP USER NAME]
Press this to enter the EAP user name that is used for the authentication.
In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
Example: [e-mail]
y
[EAP PASSWORD]
Press this to enter the EAP password that is used for the authentication.
y
[RETYPE PASS]
Press this to enter the EAP password again that you enter in the EAP PASSWORD field.
When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press the [OK] to set the entry.
4
Specify the following items and press the [NEXT].
y
ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.
The encryption intensity between each encryption is:
AES(CCMP) > TKIP