User's Manual
Table Of Contents
- PRECAUTIONS
- Precautions for Use
- About TOSHIBA Wireless Solution
- Wireless Interoperability
- Wireless LAN and your Health
- Safety Instruction for Wireless Products
- Regulatory Information
- Canada - Industry Canada (IC)
- Europe - EU Declaration of Conformity
- USA-Federal Communications Commission (FCC)
- Regulatory Notice for Channel Use in France
- Approved Countries/Regions for use for the Toshiba Wireless LAN
- NOTES!
- Table of Contents
- Setting Up Wireless Network
- Appendix
- INDEX
1. Setting Up Wireless Network
42 GN-1050 Operator’s Manual — Setting up the Ad Hoc Mode
5. Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
Selecting no security mode
You can also set no security for wireless access.
NOTE: If you do not set no security, anyone how knows the SSID can connect to the wireless
network. Therefore, it is recommended to set the security if it is possible.
1. Press the [NONE] button and press the [NEXT] button.
• The TRANSMIT POWER and RATE SETTING screen is displayed.
2. Select the transmit power and press the [NEXT] button.
• Select the low transmit power if you want to limit the area that the wireless
communication is enabled. If you do not have to limit the area, select
[100%].