User's Manual

1. Setting Up Wireless Network
GN-1041 Operator’s Manual — Setting Up the Infrastructure Mode 31
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point
and other wireless devices. Compared with WPA/WPA2/802.1x and WPAPSK/
WPA2PSK, the WEP is less security. If the wireless network is configured in the Infra-
structure Mode and the Access Point supports WPA/WPA2/802.1x or WPAPSK/
WPA2PSK, it is recommended to use WPA/WPA2/802.1x or WPAPSK/WPA2PSK
rather than WEP.
1. Press the [WEP] button and press the [NEXT] button.
• The WIRELESS ENCRYPTION - WEP screen is displayed.
NOTE: When GN-1040 is connected, the [WPA], [WPA2], and [WPA2PSK] buttons cannot be
selected.
2. Enter the following items and press the [NEXT] button.
z WEP ENCRYPTION
Select the bit length of the WEP key.
z KEY ENTRY METHOD
Select the character code for the WEP key.
z [WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and
Key Entry Method.
SUPPLEMENT: When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
64bit 128bit 152bit
HEX :
10 26 32
ASCII :
51316