Operation Manual

4. DIAGNOSTIC TEST OPERATION
EO18-11004A
4.1 Print Test
4- 1
4. DIAGNOSTIC TEST OPERATION
4.1 Print Test
(1) Contents
The print condition is tested by printing “H” repeatedly and all the printable characters on the
printer.
(2) Operation
Control Lock: BLIND
8001 [AT/TL]
(3) Print Sample
NOTE: This test cannot be stopped until all characters are completely printed.
10 lines of “H” (regular-sized) consecutive print
10 lines of “H” (double-sized) consecutive print
Each character of the character codes 20h to 0FEh; one line for each character