Operation Manual

ManualsBrandsToshiba TEC ManualsPrintere-STUDIO520

Table Of Contents

CONTENTS
NOTICE TO USERS
TOSHIBA QUALITY IS SECOND TO NONE
- Supplies / Parts
- Toner
- General
PREFACE
FEATURES OF THE e-STUDIO520/600/720/850
GENERAL PRECAUTIONS
- When installing or moving
- When using the multifunctional digital systems
- During maintenance or inspection
- When handling supplies
  - Caution
DISCLAIMER NOTICE
1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
  - Turning power on
    - When controlling use of equipment with department codes
  - Shutdown
    - Shutting down with the [ENERGY SAVER] button
- 3. Energy Saving Mode
- 4. Setting Copy Paper
2. HOW TO MAKE COPIES
- 1. General Copying Procedures
  - Initial (Default) settings
  - Copying procedure
- 2. Setting Originals
- 3. Auto Job Start (Job Preset)
  - Setting auto job start
  - Confirming and canceling auto job
- 4. Interrupt Copying
- 5. Stopping Copy Operation
- 6. Bypass Copying
3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
  - Automatic copy density mode
  - Manual copy density mode
4. IMAGE ADJUSTMENT
- 1. Background Adjustment
- 2. Sharpness
5. USING THE EDITING FUNCTIONS
- 1. IMAGE SHIFT
- 2. EDGE ERASE
- 3. BOOK CENTRE ERASE
- 4. DUAL PAGE
- 5. 2IN1 / 4IN1
- 6. MAGAZINE SORT
- 7. EDITING
- 8. XY ZOOM
- 9. COVER SHEET
- 10. SHEET INSERTION
- 11. TIME STAMP
- 12. PAGE NUMBER
- 13. JOB BUILD
- 14. IMAGE DIRECTION
- 15. BOOK - TABLET
- 16. ADF / SADF
  - Continuous feed mode
  - Single feed mode
- 17. TAB PAPER
- 18. INSERTER
6. e-FILING
- 1. e-Filing
- 2. Creating User Boxes
- 3. Changing Data of User Boxes
- 4. Deleting User Boxes
- 5. Storing Documents in e-Filing
- 6. Printing Stored Documents
- 7. Deleting Folders or Documents
7. TEMPLATE
- 1. Template
- 2. Registering User Groups and Templates
- 3. Changing Data of User Groups and Templates
  - Changing the data of a user group
  - Changing the data of a template
- 4. Recalling Templates
  - When recalling a template in a public group
  - When recalling a template in a user group
- 5. Deleting User Groups or Templates
  - Deleting a user group
  - Deleting a template
8. JOB STATUS
- 1. Job Status
- 2. Confirming Print Job Status
- 3. Confirming Scan Job Status
- 4. Log List
- 5. Print Status Display
  - Releasing print job errors
- 6. Error Code
9. BLINKING GRAPHIC SYMBOLS
- 1. Blinking Graphic Symbols
- 2. Drawer Display on the Touch Panel
- 3. Toner-Related Symbols
- 4. Jam Symbols
- 5. Call Service Symbol
10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
11. MAINTENANCE
- 1. Daily Inspection
- 2. Simple Troubleshooting
12. SPECIFICATIONS & OPTIONS
- 1. e-STUDIO520/600/720/850 Specifications
- 2. Specificatons of Options
- 3. Packing List
- 4. Copying Function Combination Matrix
  - Combination Matrix 1/2
  - Combination Matrix 2/2
INDEX

Book-type originals

Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force. Breaking

the glass could injure you.

Raise the Reversing Automatic Document Feeder.

Lower the Reversing Automatic Document Feeder slowly.

• Do not lower the Reversing Automatic Document Feeder forcibly when the original is very thick. There will be

no problem in copying even if the Reversing Automatic Document Feeder is not fully lowered.

• Do not look fully at the original glass because intensive light may leak out during copying.

Open the desired page of the original and

place it face down. Align it against the

left rear corner of the glass.

• When you want to use the 2-sided copying function or the dual-

page function on the book-type originals, align the centre of the

original on the yellow indicator line of the glass.

( P.108 “Book-type original -> 2-sided copy”)

( P.129 “4.DUAL PAGE”)