Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX

258
8.JOB STATUS
6.Error Code (Cont.)
8
1C70 SMTP client OFF Ask your administrator to enable the SMTP Client and perform
the job again.
1C71 SMTP authentication
error
Check if the SMTP authentication method, login name and
password are correct.
1C72 POP Before SMTP
error
Check if the settings of POP Before SMTP and POP3 are cor-
rect.
1C80 Internet Fax transmis-
sion failure when pro-
cessing E-mail job
received
Confirm the “Received Internet Fax Forward” settings.
1C81 Onramp Gateway
transmission failure
Confirm the mail box settings.
1C82 Internet Fax transmis-
sion failure when pro-
cessing Fax job
received
Confirm the “Received Fax Forward” setting.
1CC0 Job canceling Job was canceled
1CC1 Power failure Check if the power cable is connected properly and it is inserted
securely. Check if the power voltage is unstable.
3A10-3A12 MIME format error Ask the sender to resend the E-mail in the MIME1.0 format.
3A20-3A22 E-mail process error Ask the sender to resend the E-mail.
3A30 Partial E-mail timeout
error
Ask the sender to resend the E-mail, or change the Partial Wait
time setting.
3A40 Invalid partial E-mail
received
Ask the sender to resend the partial E-mail in the RFC2046 for-
mat.
3A50-3A52 HDD full error Ask the sender to resend the E-mail by separating it to several
E-mails. If this error occurs because the paper empty occurs
and too much waiting jobs are stored in the hard disc, add the
paper to activate other jobs.
3A60-3A62 HDD full alert Ask the sender to resend the E-mail by separating it to several
E-mails. If this error occurs because the paper empty occurs
and too much waiting jobs are stored in the hard disc, add the
paper to activate other jobs.
3A70 Interrupt partial E-mail
reception
Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
3A80-3A82 Partial E-mail disabled Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
3B10-3B12 E-mail format error Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
3B20-3B22 Context-Type error Ask the sender to resend the E-mail with attached files that are
the TIFF format.
3B30-3B32 Invalid character set Ask the sender to resend the E-mail in the ISO-8559-1/2 format.
3B40-3B42 E-mail decode error Ask the sender to resend the E-mail.
3C10-3C13 TIFF analysis error Ask the sender to resend the E-mail with attached files that are
the TIFF format.
Error code Problem What to do










