Operation Manual

ManualsBrandsToshiba TEC ManualsPrintere-STUDIO520

141

142

143

144

145

146

147

148

149

150

Table Of Contents

CONTENTS
NOTICE TO USERS
TOSHIBA QUALITY IS SECOND TO NONE
- Supplies / Parts
- Toner
- General
PREFACE
FEATURES OF THE e-STUDIO520/600/720/850
GENERAL PRECAUTIONS
- When installing or moving
- When using the multifunctional digital systems
- During maintenance or inspection
- When handling supplies
  - Caution
DISCLAIMER NOTICE
1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
  - Turning power on
    - When controlling use of equipment with department codes
  - Shutdown
    - Shutting down with the [ENERGY SAVER] button
- 3. Energy Saving Mode
- 4. Setting Copy Paper
2. HOW TO MAKE COPIES
- 1. General Copying Procedures
  - Initial (Default) settings
  - Copying procedure
- 2. Setting Originals
- 3. Auto Job Start (Job Preset)
  - Setting auto job start
  - Confirming and canceling auto job
- 4. Interrupt Copying
- 5. Stopping Copy Operation
- 6. Bypass Copying
3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
  - Automatic copy density mode
  - Manual copy density mode
4. IMAGE ADJUSTMENT
- 1. Background Adjustment
- 2. Sharpness
5. USING THE EDITING FUNCTIONS
- 1. IMAGE SHIFT
- 2. EDGE ERASE
- 3. BOOK CENTRE ERASE
- 4. DUAL PAGE
- 5. 2IN1 / 4IN1
- 6. MAGAZINE SORT
- 7. EDITING
- 8. XY ZOOM
- 9. COVER SHEET
- 10. SHEET INSERTION
- 11. TIME STAMP
- 12. PAGE NUMBER
- 13. JOB BUILD
- 14. IMAGE DIRECTION
- 15. BOOK - TABLET
- 16. ADF / SADF
  - Continuous feed mode
  - Single feed mode
- 17. TAB PAPER
- 18. INSERTER
6. e-FILING
- 1. e-Filing
- 2. Creating User Boxes
- 3. Changing Data of User Boxes
- 4. Deleting User Boxes
- 5. Storing Documents in e-Filing
- 6. Printing Stored Documents
- 7. Deleting Folders or Documents
7. TEMPLATE
- 1. Template
- 2. Registering User Groups and Templates
- 3. Changing Data of User Groups and Templates
  - Changing the data of a user group
  - Changing the data of a template
- 4. Recalling Templates
  - When recalling a template in a public group
  - When recalling a template in a user group
- 5. Deleting User Groups or Templates
  - Deleting a user group
  - Deleting a template
8. JOB STATUS
- 1. Job Status
- 2. Confirming Print Job Status
- 3. Confirming Scan Job Status
- 4. Log List
- 5. Print Status Display
  - Releasing print job errors
- 6. Error Code
9. BLINKING GRAPHIC SYMBOLS
- 1. Blinking Graphic Symbols
- 2. Drawer Display on the Touch Panel
- 3. Toner-Related Symbols
- 4. Jam Symbols
- 5. Call Service Symbol
10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
11. MAINTENANCE
- 1. Daily Inspection
- 2. Simple Troubleshooting
12. SPECIFICATIONS & OPTIONS
- 1. e-STUDIO520/600/720/850 Specifications
- 2. Specificatons of Options
- 3. Packing List
- 4. Copying Function Combination Matrix
  - Combination Matrix 1/2
  - Combination Matrix 2/2
INDEX

144

5.USING THE EDITING FUNCTIONS

9. COVER SHEET

This function allows you to insert special sheets of paper (such as colour paper) into a set of copies as

cover sheets. A copied front cover sheet can be inserted. The back cover sheet is inserted blank. There

are 4 types of sheet insertion modes:

1. Adding a blank front cover sheet ([TOP BLANK])

2. Adding a copied front cover sheet ([TOP COPIED])

3. Adding a blank front and blank back cover sheets ([BOTH BLANK])

4. Adding a copied front and blank back cover sheets ([TOP COPIED BACK BLANK])

Place the cover sheet.

• Place the cover sheet in the drawer selected for cover sheets, on the bypass tray or the Inserter Unit. (How-

ever, the Inserter Unit cannot be used with [TOP COPIED] or [TOP COPIED BACK BLANK].)

• When it is placed in the drawer for the cover sheets, you must set the paper type (cover sheet), size and thick-

ness. ( P.46 “Drawer for special uses”)

• When it is placed on the bypass tray, you must set the paper size and thickness. ( P.69 “6.Bypass Copying”)

• When you use the Inserter Unit with [TOP BLANK] or [BOTH BLANK], see  P.173 “18.INSERTER”.

• Make sure the cover sheet and the sheets other than the cover sheet are placed in the same direction and of

the same size.

Place paper (other than cover paper) in the drawer(s).

• Make sure the cover sheet and the copy paper have the same orientation and size.