Manualshelf

Operation Manual

ManualsBrandsToshiba TEC ManualsPrintere-STUDIO4511
261262263264265266267268269270
262
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.)
12
Replacing the Black (K) Toner Cartridge
* When you want to replace a cartridge before the REPLACE TONER CARTRIDGE symbol blinks, see the
[User Functions Guide].
1
Open the front cover.
2
While pushing on the latch, lower the
cartridge holder toward you.
3
Pull the cartridge out carefully.
- If you cannot pull it straight out, pull it out rotating it clockwise.
If it cannot be pulled out, close the front cover, turn the power OFF
and then ON again. When “Install new Black toner cartridge”
appears, start the procedure again from step 1.
To turn the power OFF, see "Turning off the Power (Shutting down)"
Page 30.
NEVER attempt to incinerate toner cartridges. This could cause an
explosion.
DO NOT dispose of used toner cartridges. Your service technician
will collect them.