Operation Manual

1 How to use e-STUDIO Scan
8 Registering Extended Field Definition
Registering Extended Field Definition
You can register up to 10 "extended field definitions".
When using applications that interact with e-STUDIO Scan, follow the instructions of the application vendor to
set the extended field.
1
Launch a web browser and enter the following URL in the address box.
http://<IP Address> or http://<Device Name>
For example
When the IP address of your device "10.10.70.120" (when IPv4 used):
http://10.10.70.120
When the IP address of your device is "3ffe:1:1:10:280:91ff:fe4c:4f54" (when IPv6 used):
3ffe-1-1-10-280-91ff-fe4c-4f54.ipv6-literal.net
or
http://[3ffe:1:1:10:280:91ff:fe4c:4f54]
When your device name is "mfp-04998820":
http://mfp-04998820
When SSL for the HTTP network service is enabled, an alert message may appear when you enter
the URL in the address box. In that case, click [Continue to this website (not recommended).] to
proceed.
2
Click [Settings] > [Other Setting - Apps] > [Apps Management] > [e-STUDIO Scan].