User's Manual

10/12

13. Supplementary Operational Manual

SDHC memory card with embedded wireless LAN functionality

----------------------------------------------------------------------------------------------------------------------------------------------

Manual

Thank you for purchasing Toshiba FlashAir™ (“Product”).

To ensure proper use, please read this manual and your device manual carefully and entirely before using the Product, then retain this manual

for future reference.

The Product can be used with the devices which are compatible with 8GB SDHC memory cards.

Before using the Wireless LAN capability of the Product, please set Wireless LAN security options.

Do not format the Product with devices which are not compatible with the SDHC format. Formatting with devices which are not compatible with

SDHC could cause failure of the wireless LAN functionality of the Product

Security Notice in the use of Wireless LAN products

Wireless LAN sends and receives data between devices such as personal computers and access points by means of radio transmission rather

than network cables. Absent obstructions, radio transmission enables a wireless LAN connection.

Users should take appropriate security measures to prevent third parties from hacking or stealing data transmitted wirelessly. Please review

the security procedures in this manual carefully before using the Product.

Important message: Initial Settings

Be sure to change security key (password) before using. If you fail to do so, your data (e.g. Photos) may be stolen or hacked by third

party.

1. Using the Product in wireless LAN devices such as smartphones, Tablet PCs, etc.

(1) Insert the Product into a device (e.g. digital camera) which is compatible with SDHC memory cards.

(2) Turn on the device. The wireless LAN functionality of the Product will run automatically. Please take the security steps described below

as quickly as possible to prevent unauthorized users from inputting a security key. If an unauthorized party configures security settings, you will

need to initialize the card using FlashAir configuration software.

(3) Within five (5) minutes after turning on the device, connect to the Product according to the following steps using a wireless LAN device

(e.g. smartphone). Without any connection from a wireless LAN device within 5 minutes, wireless LAN functionality of the Product will be

automatically turned off. If wireless LAN functionality is turned off, please turn on the device again.

(4) Activate the wireless LAN feature of the device (e.g. smartphone). When the device searches available wireless LAN networks,

“flashair_xxxxxxxxxxxx(twelve-digit alphanumeric characters)” should appear.

(5) Select “flashair_xxxxxxxxxxxx”. Enter the default security key “12345678” for the network, and the device will connect to the Product.

(6) Please change the default security key. Open the browser of the device and enter the following address into the URL input field.

http://flashair/

(7) The below screen (fig.1) should be displayed. Press the arrow and go to the next page.