User Manual

12/12

2. How to save files

Operating procedures may vary as device operating systems are updated. Please refer to instructions for your device.

 Android devices or smartphones: Tap and hold the file. Tap “Save image” on a pop-up option list and the item will be saved to the device.

 iPhone/iPad: Touch and hold the file. Tap “Save Image” and the item will be saved to the device.

 PC: Place the pointer on the file and right-click to open a pop-up menu. Click “Save Picture As…” or “Save Target As” and the item will be

saved to the device.

3. Operating Precautions

 If wireless LAN functionality is turned off while using the Product, the device within which the Product is used might power off

automatically. Please extend the automatic power off time of the device to the longest period possible.

 The range of the wireless signal can be affected when the Product is placed near metal surfaces and/or solid high-density materials.

 When a number of devices connect to the Product, the wireless LAN connection might slow down or be interrupted.

 The folder “100_TSB” is pre-written on the Product and the JPEG file “FA000001.JPG” is pre-written in the folder. When the Product is

used in a digital camera, the below image will be displayed. This folder and the file are necessary for the operation of the FlashAir

configuration software. Do not delete the folder and file, or you will be unable to change the automatic-manual operation for

wireless LAN functionality.

The detail information how to use this image is available on on-line help of FlashAir configuration software.

If you delete them, you can reset the Product to factory defaults using the “Initialize Card” menu of FlashAir configuration software.

The “Initialize Card” feature may cause all the data and initial settings stored in the Product to be lost. Back up your data on multiple

types of storage media before using this feature.

 The Product is compliant with local radio regulations in following countries or regions. (as of February 2012)

Japan, North America, Canada, EU (European Union)

Use in other countries and regions may violate local ordinances.

You can check the latest information at online manual (http://www/toshiba.co.jp/p-media/flashair/manual.htm) or contact your Customer

Service.

 Default settings

SSID

flashair_xxxxxxxxxxxx ( x represents MAC address of the Product)

Security

WPA2 security key: 12345678

Encryption and authentification

WPA2-AES (access point mode)

IP Address

192.168.0.1 (access point mode)

Wireless LAN functional specifications

Wireless LAN Standard: IEEE802.11b/g/n

Modulation: DSSS/CCK (1, 2, 5.5, 11 Mbps), OFDM (6 to 72.2 Mbps)

Wireless LAN Security: WEP, TKIP, AES (WPA/WPA2)