User Manual

7/9

11. Main Specifications

[Operating Ambience］ Temperature: -25～85℃(-13～185 ), Humidity:95%RH

[Size] 32.0（L）×24.0（W）×2.1mm（T）

[Weight] 2g

[Interface] SDHC Memory Card Standard

[Input Voltage] 2.7～3.6V(Max)

[Content of the Package] SDHC memory Card (1 pc), Card case (1 pc), User manual

[User Area] 7.4GB

[WLAN Supported Channel] 1～11ch

12. How to view pictures inside memory by using Wireless LAN

The Product's wireless LAN (WLAN) function and Web server function are enabled when a special picture file is

set to the protected mode.As the Web server function is enabled, the data stored in this card can be accessed via

PC and Smartphone, etc.

●WLAN mode description

When Web server function is started, this product tries to find WLAN Access Point (AP) whose SSID matches with

the card settings. If intended WLAN AP was found, the Product automatically tries to connect to it. Once succeed in

the connection, the Product operates as station mode (WLAN infrastructure mode). On the other hand, if target

WLAN AP cannot be found, the Product operates as access point mode (WLAN infrastructure mode).

● Default setting of Web server function

SSID

Flashair

Security Key

None

Encryption

None

IP Address

192.168.0.1 (The Product operates as access point mode.)

Assigned by AP's DHCP (The Product operates as station mode.)

Subnet Mask

255.255.255.0

Setting picture for

Web server operation

●Caution for Web server function

If Web server function stops during use of the Product, the power of the host device like digital camera might be

turned off. Therefore, please select the possible longest time if the host device like digital camera has the setting

menu about length of time relating to the auto power off. WLAN function of this product may not operate in some

host devices like digital camera in which radiated signal from the Product is blocked. The Product is designed for

being used at a local network. Therefore a global IP address should not be assigned.