Datasheet

TLP624,TLP624−2,TLP624−4
2007-10-01
2
Absolute Maximum Ratings
(Ta = 25°C)
Rating
Characteristic Symbol
TLP624
TLP624−2
TLP624−4
Unit
Forward current I
F
60 50 mA
Forward current detating ΔI
F
/ °C −0.7(Ta ≥ 39°C) −0.5(Ta ≥ 25°C) mA / °C
Pulse forward current I
FP
1(100μs, pulse, 100pps) A
Power dissipation(1 Circuit) P
D
100 70 mW
Power dissipation derating
(Ta ≥ 25°C, 1 Circuit)
ΔP
D
/ °C −1.0 −0.7 mW / °C
Reverse voltage V
R
5 V
LED
Junction temperature T
j
125 °C
Collector−emitter voltage V
CEO
55 V
Emitter−collector voltage V
ECO
7
V
Collector current I
C
50
mA
Collector power dissipation(1 circuit) P
C
150
100 mW
Collector power dissipation derating
(Ta ≥ 25°C, 1 Circuit)
ΔP
C
/ °C −1.5 −1.0 mW / °C
Detector
Junction temperature T
j
125 °C
Storage temperature range T
stg
−55~125 °C
Operating temperature range P
opr
−55~100 °C
Lead soldering temperature T
sol
260(10s) °C
Total package power dissipation(1 Circuit) P
T
250 150 mW
Total package power dissipation derating
(Ta ≥ 25°C, 1 Circuit)
ΔP
T
/ °C −2.5 −1.5 mW / °C
Isolation voltage (Note 1) BV
S
5000(AC, 1min., RH≤60%) Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) Device considered a two terminal device: LED side pins shorted together, and detector side pins shorted
together.
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage V
CC
― 5 24 V
Forward current I
F
― 1.6 20 mA
Collector current I
C
― 1 10 mA
Operating temperature T
opr
−25 ― 75 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.