User's Manual

10. 3.3V

11. SD-DAT3

12. 1.8V

13. RESET

Installation

Figure 2 shows an example of installation.

1. Place the rear side of the unit on the electrically-grounded metal surface and fix

with two screws as shown in Figure 2.

2. Plug the FFC cable in 13-pin connector for FFC cable.

■ Notes

Do not place any objects which do not conduct electric waves outside the chip

antenna.

Figure 2.

This device contains WLAN module and FCC ID: CJ6UTDPW01WL / IC ID: 248H-DTDPW01W