User's Manual

4-11
O
PERATING
B
ASICS
Changing to the PC mode
Changing to the PC mode
To change the Tablet PC mode to the PC mode, follow the instructions below.
1. Press the Display latch and raise the display to the upright position carefully.
2. Rotate the display counter-clockwise slowly.
3. Turn the display latch tab toward you for the next closing of the display.
Using the USB FDD Kit
A 3 1/2" external diskette drive module connects to the USB port.
NOTE: The USB FDD Kit is an option with some models.
USB CONNECTOR
D ISK-IN-USE
I NDICATOR
E JECT BUTTON
D ISKETTE SLOT
Figure 4-11 The 3 1/2" USB FDD Kit
Eject button When a diskette is fully seated in the drive, the eject
button pops out. To remove a diskette, push in the eject
button and the diskette pops out partially for easy removal.
Diskette slot Insert diskettes in this slot.
Disk-In-Use This indicator lights when the diskette is being
Indicator accessed.