User's Manual

Connect/Disconnect Network
1. Start Bluetooth
Execute Device Discovery to detect the Server machine. If you need, click here to refer to the
section of “Start Bluetooth”.
Regarding the remote device to connect, the following information is required in advance.
• Device Name: e.g. Toshiba Bluetooth Server
• Device Address: e.g. 00:50:11:22:33:44
• Passkey (Password): in case of a passkey is set up by the remote machine
2. Connect Network
Caution! The machine used as a client must not start “Start LAN Emulation Service”.
At client side, perform Device Discovery to detect a server machine and perform the following
steps.
Tick the detected server machine in the device list view, and click [Refresh] icon to do a
service search. After that, you will be able to seen “LANE” icon in the service list view as the
following figure.
Then, tick “LANE” icon, and click [connect] icon. The Client Service starts to access to the
Server machine.
The following figure shows the connection established between the Server and the Client
machine.