User's Manual

Appendix
A. Security Mode
As for the setup of security, the template is beforehand set as the Office/Mobile/Home/Others
button of Service Center as shown in the below figure. It is possible to change a security setup
easily. However, this setup is very important, so please be careful of handling.
A default security mode is configured as “Others” with “Non-security”.
If you need to change it, please refer to the “Bluetooth Utility User's Guide”.
B. Add Local COM Port
At default setting, local COM Port already creates as like COM6. However, when a port is being
used by other application, Local COM is not created.
If you need to create a new local COM Port, open [Start]-[Setting]-[Control Panel]-[LocalCOM]
and add a new COM Client Port. For more details information, please refer to the “Bluetooth Utility
User's Guide”.
C. Bluetooth Network Service