User's Manual

[3] Using the computer’s electronic conference (COM mode)

1) Before using these functions, it is necessary to connect the

computer to the BWC in the COM mode on the conputer. If

the BWC is connected to the conputer in the COM mode from

the BWC, the BWC is connected to the last computer

connected. (*).

2) Press the “POWER/STOP” button to turn on the BWC’s

power.

3) Set the mode selector switch to the “COM” side.

4) Press the “PLAY/PAUSE” button to connect the BWC to the

computer specified in step 1) above.

5) The user is notified that connection to the computer is

completed by the status LED and the sounding of a beep.

AUDIOCOM