User's Manual
Table Of Contents
- User誷 Manual
- Content
- Conventions
- Abbreviations
- Icons
- Safety icons
- Safety Instructions
- Do not disassemble, modify, tamper with or repair your product
- Handling the AC adaptor and power cables/cords or plugs
- Attaching the power cable/cord
- Dust on the power plug connectors or connector base
- Only use TOSHIBA AC adaptor
- Use correct power source
- Do not handle the power plug with wet hands
- Choking hazards
- Avoid liquids, moisture and foreign objects
- Never place your product or AC adaptor on a heat sensitive surface
- Never place your product in locations with excess heat
- Never place your product in a location with extremely low temperatures
- Never subject your product to sudden temperature variations
- Never operate your product during a thunderstorm
- Regulatory Statements
- Copyright Statement
- Disclaimer
- Trademarks
- TOSHIBA Support
- Precautions for Microsoft® Windows® 7 and Windows 8.1
- Introduction
- Quick Tour
- Using your dynadock for the first time
- Configuring Audio Ports
- Configuring Video Ports
- How Standby/Sleep/Hibernation Mode Affects Devices Attached to the dynadock
- Using the AP (Access Point) function
- Troubleshooting
- Specification
User’s Manual EN-31
dynadock
TM
WiAC
Others
Accessories of this series of products may vary depending on the model.
Please understand no advance notice for further product improvement,
appearance design and specification update.
The illustration may be a little different from the real product.
Specification
This section summarizes the technical specifications of the dynadock.
Physical Dimensions
Environmental Requirements
Power Requirements
The USB ports are
not functioning on the
dynadock.
Remove the USB device from the dynadock and
then reconnect it to a free port in order to ensure
that it is firmly attached.
Ensure that any required USB device drivers are
properly installed. To achieve this, refer to both the
device documentation and the operating system
documentation.
The LAN port is not
functioning.
Check for a firm cable connection between the LAN
jack and the LAN hub.
Problem Procedure
Weight Approx. 386g/13.6 ounces
Size About 175(w) x 108(d) x 27(h) mm (6.9(w) x 4.3(d) x
1.1(h) in.)
(not including parts that extend beyond the main body).
Conditions Ambient temperature Relative humidity
Operating 5°C to 35°C (41°F to 95°F) 20% to 80%
Non-operating -20°C to 55°C (-4°F to 131°F) 10% to 95%
AC adaptor 100-240V AC
50-60 Hz (cycles per second)
dynadock
19V DC
2.37A