User's Manual
Table Of Contents
- User誷 Manual
- Content
- Conventions
- Abbreviations
- Icons
- Safety icons
- Safety Instructions
- Do not disassemble, modify, tamper with or repair your product
- Handling the AC adaptor and power cables/cords or plugs
- Attaching the power cable/cord
- Dust on the power plug connectors or connector base
- Only use TOSHIBA AC adaptor
- Use correct power source
- Do not handle the power plug with wet hands
- Choking hazards
- Avoid liquids, moisture and foreign objects
- Never place your product or AC adaptor on a heat sensitive surface
- Never place your product in locations with excess heat
- Never place your product in a location with extremely low temperatures
- Never subject your product to sudden temperature variations
- Never operate your product during a thunderstorm
- Regulatory Statements
- Copyright Statement
- Disclaimer
- Trademarks
- TOSHIBA Support
- Precautions for Microsoft® Windows® 7 and Windows 8.1
- Introduction
- Quick Tour
- Using your dynadock for the first time
- Configuring Audio Ports
- Configuring Video Ports
- How Standby/Sleep/Hibernation Mode Affects Devices Attached to the dynadock
- Using the AP (Access Point) function
- Troubleshooting
- Specification
EN-26 User’s Manual
dynadock
TM
WiAC
When the HDMI/DisplayPort component first starts, it will extend the
primary monitor. Changes to the screen mode and HDMI/DisplayPort
component operation mode can be made under the Windows display
properties. If no output is seen on the monitor connected to the HDMI/
DisplayPort component, it might be in a mode which cannot be displayed
by the monitor. This can happen if the monitor does not report its supported
modes to the HDMI/DisplayPort component. Reduce the resolution of the
primary display, and in turn the resolution of the HDMI/DisplayPort
component display until an image is shown.
Adjusting the Video Settings for the monitor connected to the
dynadock:
■ Right-click the dynadock icon in the system tray/notification area, the
following options appears on the menu:
■ dynadock WiAC
Screen Resolution: Change the resolution setting of the external
monitor connected to the dynadock.
Screen Rotation: Rotate the image on the external monitor connected
to the dynadock.
Extend To: Specify the extension direction if you are using multiple
monitors and Extend mode. This setting should match the physical
orientation of the connected monitors relative to each other. For
example, if the external monitor is physically positioned to the right of
your computer's display, select “Extend to Right”.
Extend: Extend your desktop space across multiple monitors, so that
you can display different information on each monitor connected to your
computer.
Set as Main Monitor: Sets screens in extend mode with external
monitor connected to the dynadock as the main monitor.
Notebook Monitor Off: Sets external monitor connected to the
dynadock as the main monitor and turns off the computer screen. (May
not appear when two displays are connected to the dynadock.)
Mirror: Duplicate the image showing on your computer screen on the
external monitor connected to the dynadock.
Off: Turn off the external display. Devices connected to the dynadock
still function.
Fit to TV: Grow or shrink the size of your Windows
®
desktop to match
your TV screen (enabled when applicable).
■ Audio Setup
Shortcut to Windows
®
sound settings.
■ Video Setup
Shortcut to Windows
®
display settings.
Placing the monitor into an unsupported mode for long periods can
damage it.