User's Manual

54
EN
After connecting the USB
cable to the computer:
[DV] indicates the internal memory of the camcorder.•
[Removable Disk] indicates the external memory (SD/SDHC/•
SDXC card installed in the camcorder).
[AIR10 Connect] indicates the bundled program. If you want to •
install this program, please double-click on it to start installation
automatically.
The LCD shows
[CONNECTION FAILED]
after pressing Internet/ WiFi
Button.
The password configuration does not match to the AP you want •
to connect.
The AP router or the computer is not turned on. Turn the AP router •
or your computer on.
The camcorder is not in the wireless network service area or weak •
network signal. Please make sure the AP router is able to access
the Internet.
The camcorder does not support the type of encryption used on •
the AP. This model only supports WEP/WPA/WPA2 personal type
of encryption, but not up to enterprise level.
Your network requires PPPoE account/password information.•
Some AP routers do not allow you to connect to the network (e.g. •
firewall).
The AIR10 Connect
application cannot be
installed.
Check the computer system is compatible.•